156:1 Metal Gearmotor 20Dx44L mm 6V CB

Pololu item #: 3706
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 28.95
5 26.63
25 24.50
100 22.54


backorders allowed

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 156.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specifications:

voltage no-load performance stall extrapolation
6 V 91 RPM, 150 mA 7.9 kg⋅cm (110 oz⋅in), 2.9 A

Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Alternatives available with variations in these parameter(s): gear ratio motor type extended motor shaft? Select variant…

 Description Specs (17) Pictures (14) Resources (3) FAQs (1) On the blog (0) 

Overview

These cylindrical brushed DC gearmotors are available in a wide range of gear ratios, from 25:1 up to 488:1, and with three different motors: 6 V and 12 V motors with long-life carbon brushes (CB), and a 6 V motor with shorter-life precious metal brushes. All three motors offer similar performances at their respective nominal voltages, just with the 12 V motor drawing approximately half the current of the 6 V motor and with the carbon brush versions having longer lifetimes than the one with precious metal brushes.

The CB versions (shown on the right in the picture below), can be differentiated from versions with precious metal brushes (shown on the left) by their copper-colored terminals.

These gearmotors are optionally available with an additional 2 mm-diameter output shaft that protrudes 6 mm from the rear of the motor (see the middle picture below). This rear shaft rotates at the same speed as the input to the gearbox and offers a way to add an encoder, such as our magnetic encoder for 20D mm metal gearmotors as shown in the right picture below, to provide motor speed or position feedback.

20D mm metal gearmotor CB with long-life carbon brushes.

20D mm metal gearmotor CB with long-life carbon brushes and an extended motor shaft.

Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft.

The gearmotors all have 20 mm diameter gearboxes and 4 mm diameter gearbox output shafts, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio).

Please see the 20D metal gearmotor datasheet (1MB pdf) for more information, including detailed performance graphs for each 6V CB and 12V CB version. You can also use our dynamically sortable 20D metal gearmotor comparison table to search for the version that offers the best combination of speed, torque, and current draw for your particular application. A more basic comparison table is available below:

Rated
Voltage
Brush
Type
Stall
Current
No-Load
Current
No-Load Speed
(RPM)
Extrapolated
Stall Torque
Max Power
(W)


Single-Shaft
(Gearbox Only)


Dual-Shaft
(Gearbox & Motor)
(kg ⋅ cm) (oz ⋅ in)
12 V long-life
carbon
(CB)
1.6 A 0.08 A 550 1.9 26 2.6 25:1 12V CB 25:1 12V CB dual shaft
450 2.4 33 2.8 31:1 12V CB 31:1 12V CB dual shaft
220 4.6 64 2.6 63:1 12V CB 63:1 12V CB dual shaft
180 5.4 75 2.5 78:1 12V CB 78:1 12V CB dual shaft
140 6.1 85 2.2 100:1 12V CB 100:1 12V CB dual shaft
110 7.8 110 2.2 125:1 12V CB 125:1 12V CB dual shaft
89 9.0 130 2.0 156:1 12V CB 156:1 12V CB dual shaft
72 10 140 1.9 195:1 12V CB 195:1 12V CB dual shaft
55 14 190 2.0 250:1 12V CB 250:1 12V CB dual shaft
44 16 220 1.8 313:1 12V CB 313:1 12V CB dual shaft
36 21 290 1.7 391:1 12V CB 391:1 12V CB dual shaft
28 25 350 1.5 488:1 12V CB 488:1 12V CB dual shaft
6 V long-life
carbon
(CB)
2.9 A 0.15 A 570 1.6 22 2.3 25:1 6V CB 25:1 6V CB dual shaft
450 2.0 28 2.3 31:1 6V CB 31:1 6V CB dual shaft
230 4.0 56 2.4 63:1 6V CB 63:1 6V CB dual shaft
180 4.4 61 2.1 78:1 6V CB 78:1 6V CB dual shaft
140 5.4 75 2.0 100:1 6V CB 100:1 6V CB dual shaft
110 6.4 89 1.9 125:1 6V CB 125:1 6V CB dual shaft
91 7.9 110 1.8 156:1 6V CB 156:1 6V CB dual shaft
73 9.4 130 1.7 195:1 6V CB 195:1 6V CB dual shaft
57 12 170 1.8 250:1 6V CB 250:1 6V CB dual shaft
45 13 180 1.6 313:1 6V CB 313:1 6V CB dual shaft
36 16 220 1.4 391:1 6V CB 391:1 6V CB dual shaft
30 21 290 1.3 488:1 6V CB 488:1 6V CB dual shaft
6 V precious
metal
2.9 A 0.15 A 570 1.6 22 2.3 25:1 6V 25:1 6V dual-shaft
450 2.0 28 2.3 31:1 6V 31:1 6V dual-shaft
230 4.0 56 2.4 63:1 6V 63:1 6V dual-shaft
180 4.4 61 2.1 78:1 6V 78:1 6V dual-shaft
140 5.4 75 2.0 100:1 6V 100:1 6V dual-shaft
110 6.4 89 1.9 125:1 6V 125:1 6V dual-shaft
91 7.9 110 1.8 156:1 6V 156:1 6V dual-shaft
73 9.4 130 1.7 195:1 6V 195:1 6V dual-shaft
57 12 170 1.8 250:1 6V 250:1 6V dual-shaft
45 13 180 1.6 313:1 6V 313:1 6V dual-shaft
36 16 220 1.4 391:1 6V 391:1 6V dual-shaft
30 21 290 1.3 488:1 6V 488:1 6V dual-shaft

Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. In order to avoid damaging the gearbox, we recommend keeping continuously applied loads under 5 kg-cm (75 oz-in) for the versions with carbon brushes (12V CB and 6V CB) and under 3.5 kg-cm (50 oz-in) for the versions with precious metal brushes. Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes, especially for motors like this that can deliver a lot of power for their size; a general recommendation for brushed DC motors is to limit continuous current to approximately 25% of the stall current.

In general, these kinds of motors can run at voltages above and below their nominal voltages; lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.

Details for item #3706

Exact gear ratio: ``(28×28×25×25×25×25) / (14×14×10×10×10×10) = bb(156.25:1)``

These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor with long-life carbon brushes combined with a 156.3:1 metal spur gearbox. The gearmotor is cylindrical with a diameter of 20 mm, and the D-shaped output shaft is 4 mm in diameter and extends 18 mm from the face plate of the gearbox.

Key specifications:

voltage no-load performance stall extrapolation
6 V 91 RPM, 150 mA 7.9 kg⋅cm (110 oz⋅in), 2.9 A

Note: the gearbox torque limit is 70 oz-in (5 kg-cm); see detailed description for important product limitations.

Dimensions

The diagram below shows the dimensions of the 20D mm line of metal gearmotors (units are mm over [inches]). This diagram is also available as a downloadable PDF (99k pdf).

Dimensions of the Pololu 20D mm metal gearmotors. Units are mm over [inches]. This diagram only applies to the listed gear ratios.

Warning: Do not screw too far into the mounting holes as the screws can hit the gears. We recommend screwing no more than 3.5 mm (0.14″) into the M2.5 mounting holes.

Gearmotor accessories

The gearmotor face plate has two mounting holes threaded for M2.5 screws, and you can use our custom-designed 20D mm metal gearmotor bracket (shown in the left picture below) to mount the gearmotor to your project via these mounting holes and the screws that come with the bracket.

Pololu 20D mm metal gearmotor bracket pair with included hardware.

20D mm metal gearmotor with a univeral aluminum mounting hub and mounted on a 20D mm metal gearmotor bracket.

The 4 mm diameter gearbox output shaft works with Pololu universal aluminum mounting hub for 4mm shafts, which can be used to mount our larger Pololu wheels (60mm-, 70mm-, 80mm-, and 90mm-diameter) or custom wheels and mechanisms to the gearmotor’s output shaft as shown in the left picture below. Alternatively, you could use our 4mm scooter wheel adapter to mount many common scooter, skateboard, and inline skate wheels to the gearmotor’s output shaft as shown in the right picture below.

Pololu 70×8mm wheel mounted to a 20D mm metal gearmotor using a universal aluminum mounting hub for 4mm shafts.

A 20D mm gearmotor connected to a scooter wheel by the 4 mm scooter wheel adapter.

These motors also work with the hex adapters included with the 120mm-diameter Wild Thumper wheels (the left picture below shows a 20D mm gearmotor while the right picture shows a larger 25D mm gearmotor):

Dagu Wild Thumper wheel 120×60mm (metallic red) with Pololu 20D mm metal gearmotor.

Dagu Wild Thumper wheel 120×60mm (chrome) with Pololu 25D mm metal gearmotor.

For a general-purpose hex adapter, consider our 12mm hex wheel adapter, which lets you use this motor with many common hobby RC wheels.

12mm Hex Wheel Adapter for 4mm Shaft on a 20D mm Metal Gearmotor.

You can use our magnetic encoder kit for 20D mm metal gearmotors to provide motor speed or position feedback. Please note that this kit only works on gearmotor versions that have an extended motor shaft.

Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft.

Magnetic Encoder Kit for 20D mm Metal Gearmotors assembled on a 20D mm metal gearmotor with extended motor shaft.

We have a number of motor controllers and motor drivers that work with these 20D mm metal gearmotors. In particular, we recommend our MC33296-based motor drivers, for which we have basic single and dual carriers and a dual-channel shield for Arduino. Our VNH5019-based motor drivers (available as single and dual carriers) also work well with these motors, and because they can handle higher currents, they will run much cooler than the MC33926 carriers. If you are looking for higher-level control interfaces, such as USB, RC, analog voltages, or serial, consider our SMC 18v7, Jrk 21v3, or TReX Jr.

Pololu dual MC33926 motor driver shield for Arduino.

VNH5019 motor driver carrier.

Simple Motor Controller 18v7, fully assembled.

We have an assortment of Hall effect-based current sensors to choose from for those who need to monitor motor current:

ACS711EX current sensor carrier -15.5A to +15.5A.

ACS714 current sensor carrier -5A to +5A.

Selecting the Right Gearmotor

We offer a wide selection of metal gearmotors that offer different combinations of speed and torque. Our metal gearmotor comparison table can help you find the motor that best meets your project’s requirements.

People often buy this product together with:

Pololu Universal Aluminum Mounting Hub for 4mm Shaft, #4-40 Holes (2-Pack) Pololu Universal Aluminum Mounting Hub for 4mm Shaft, #4-40 Holes (2-Pack)
Pololu 20D mm Metal Gearmotor Bracket Pair Pololu 20D mm Metal Gearmotor Bracket Pair
100:1 Metal Gearmotor 20Dx44L mm 6V CB 100:1 Metal Gearmotor 20Dx44L mm 6V CB

Related Products

Magnetic Encoder Pair Kit for 20D mm Metal Gearmotors, 20 CPR, 2.7-18V
Pololu 20D mm Metal Gearmotor Bracket Pair
Pololu Universal Aluminum Mounting Hub for 4mm Shaft, #4-40 Holes (2-Pack)
Pololu Universal Aluminum Mounting Hub for 4mm Shaft, M3 Holes (2-Pack)
Pololu Aluminum Scooter Wheel Adapter for 4mm Shaft
12mm Hex Wheel Adapter for 4mm Shaft (2-Pack)
Dagu Wild Thumper Wheel 120x60mm Pair with 4mm Shaft Adapters - Metallic Red
Dagu Wild Thumper Wheel 120x60mm Pair with 4mm Shaft Adapters - Chrome
Pololu Wheel 60×8mm Pair - Black
Pololu Wheel 90×10mm Pair - White
MC33926 Motor Driver Carrier
Pololu Dual MC33926 Motor Driver Shield for Arduino
Dual MC33926 Motor Driver Carrier
VNH5019 Motor Driver Carrier
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu Simple Motor Controller 18v7 (Fully Assembled)
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Qik 2s15v9 Dual Serial Motor Controller
Jrk 21v3 USB Motor Controller with Feedback
Jrk G2 18v19 USB Motor Controller with Feedback
A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge
A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge (SMT Components Only)

Related Categories

6V Carbon Brush (CB) 20D Gearmotors
4mm Shaft Gearmotors
Pololu Metal Gearmotors
Pololu Wheels and Tracks
Brushed DC Motor Controllers
Brushed DC Motor Drivers
Robot Controllers
Current Sensors
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors