Motoron M3H550 Triple Motor Controller for Raspberry Pi

The Motoron M3H550 triple motor controller makes it easy to control DC motors from a Raspberry Pi using I²C. Each stackable module supports motor supply voltages from 1.8 V to 22 V and can independently control up to three motors with continuous output currents up to 1.7 A per channel.

Motoron M3H550 Triple Motor Controller for Raspberry Pi (Connectors Soldered).

A Motoron M3H550 being controlled by a Raspberry Pi.

Products in category “Motoron M3H550 Triple Motor Controller for Raspberry Pi”

Pololu item #: 5071
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

The Motoron M3H550 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that need to control even more motors. The M3H550 supports motor supply voltages from 1.8 V to 22 V and can deliver continuous output currents up to 1.7 A per motor. This version ships with soldered stackable headers and terminal blocks.

Pololu item #: 5072
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

The Motoron M3H550 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that need to control even more motors. The M3H550 supports motor supply voltages from 1.8 V to 22 V and can deliver continuous output currents up to 1.7 A per motor. This version ships with a variety of header pin and terminal block options included but not soldered in.

Pololu item #: 5073
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

The Motoron M3H550 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that need to control even more motors. The M3H550 supports motor supply voltages from 1.8 V to 22 V and can deliver continuous output currents up to 1.7 A per motor. This version is just the motor controller by itself, without any connectors or mounting hardware included.

Related Categories

Motoron Motor Controllers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors