Tools

This all-purpose wire stripper cleanly strips the tips of 16-26 AWG wires, has built-in extras including wire cutters, steel wire cutters, and a crimping tool, and its tip functions as pliers.

These mini long-nose pliers are great for getting a grip on small components. They are made of forged steel, have a return spring and cushion grip, and are 5" long

These diagonal cutters come in handy whether you’re cutting wires or trimming plastic parts off of parts trees. They are made of forged steel, have a return spring and cushion grip, and are 4.5" long.

This crimping tool can be used to crimp both male and female versions of our Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1" housings onto 16-28 AWG wires to make custom cables. The tool offers ratcheting action for increased consistency and ease of use.

This crimping tool can be used to crimp both male and female versions of our JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1" housings onto 20-28 AWG wires to make custom cables. The tool offers ratcheting action for increased consistency and ease of use.

This 3/16″ × 3″ slotted screwdriver has a chrome vanadium shaft and measures 6" from its tip to the end of its plastic handle.

This #1 × 3″ slotted screwdriver has a chrome vanadium shaft and measures 6" from its tip to the end of its plastic handle.

This 0.05" diameter, 1.75" long by 0.6" wide flat-ended hex key works with small hex screws, such as the #4-40 set screws included with some of our mounting hubs.

This fine-tip, high-precision tweezer works with components as small as 0.01 mm and is good for holding wires and surface-mount parts in place while soldering them. It is ESD-safe and made of anti-magnetic, anti-acid, and non-corrosive stainless steel. This tweezer is straight; we also sell curved tweezers.

This fine-tip, high-precision tweezer works with components as small as 0.01 mm and is good for holding wires and surface-mount parts in place while soldering them. It is ESD-safe and made of anti-magnetic, anti-acid, and non-corrosive stainless steel. This tweezer is curved; we also sell straight tweezers.

This high-quality 25-Watt soldering iron has a rubber sleeve handle and a screw-in replaceable tip that’s plated for long life. The accompanying heavy-duty metal stand comes with a sponge for cleaning the iron’s tip while you work.

This high-quality 25-Watt soldering iron has a rubber sleeve handle and a screw-in replaceable tip that’s plated for long life. The accompanying stand has a plastic base with a flip-up wire.

The iMAX-B6AC can charge and discharge NiMH, NiCd, Pb, LiPo, Li-ion, and LiFe batteries with individual cell balancing for up to 6 lithium cells. It features a built-in adapter that can be powered from 100–240 VAC, or it can alternatively be powered via a 11–18 VDC input. With its versatile charging capabilities and advanced features like input power monitoring, delta-peak sensitivity, cyclic charging and discharging, and more, the iMAX-B6AC is a great addition to the workbench of any RC, DIY, or robot enthusiast.

This device serves as an inline watt meter that measures the current, voltage, and total output of a power source. It can also check and balance the cell voltage of lithium-based battery packs with up to six cells.