Raspberry Pi

Products in category “Raspberry Pi”

Pololu item #: 2760
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The Raspberry Pi is a credit card-sized computer with an ARM processor that can run Linux. This item is the Raspberry Pi 1 Model A+ 512MB, which has 512 MB of RAM, an HDMI output, audio output, RCA composite video output (through the 3.5 mm jack), one USB port, and 0.1″-spaced pins that provide access to general purpose inputs and outputs (GPIO). The Model A Raspberry Pis are smaller and less expensive than the Model B Raspberry Pis. The Raspberry Pi requires a microSD card with an operating system on it (not included). The Raspberry Pi is very popular, with lots of example projects and information available online.

Pololu item #: 2759
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The Raspberry Pi is a credit card-sized computer with an ARM processor that can run Linux. This item is the Raspberry Pi 3 Model B, which has 1 GB of RAM, WiFi, Bluetooth 4.1, Bluetooth Low Energy (BLE), an Ethernet port, HDMI output, audio output, RCA composite video output (through the 3.5 mm jack), four USB ports, and 0.1″-spaced pins that provide access to general purpose inputs and outputs (GPIO). The Raspberry Pi requires a microSD card with an operating system on it (not included). The Raspberry Pi is very popular, with lots of example projects and information available online.

Pololu item #: 3117
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.8 A per channel to two brushed DC motors. An efficient voltage regulator (2.7 V to 11 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3117) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

Pololu item #: 3116
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.8 A per channel and an efficient voltage regulator that allows the controller to work with a 2.7 V to 11 V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3116) does not include any through-hole components or connectors, allowing for customized assembly or standalone use.

Pololu item #: 3119
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This programmable module combines with a Raspberry Pi to serve as the control center of a small robot or electronics project. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader, and the board includes dual motor drivers that can deliver 1.7 A per channel to two brushed DC motors. An efficient voltage regulator (5.5 V to 36 V input) and level shifters enable it to power and communicate with a Raspberry Pi. This version (item #3119) is assembled with selected through-hole connectors and components installed for use as a Raspberry Pi add-on.

Pololu item #: 3118
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its Atmel ATmega32U4 microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.7 A per channel and an efficient voltage regulator that allows the controller to work with a 5.5 V to 36 V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3118) does not include any through-hole components or connectors, allowing for customized assembly or standalone use.

Pololu item #: 2756
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board enables a Raspberry Pi B+, A+, Pi 2, or Pi 3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. This version ships fully assembled with connectors soldered in.

Pololu item #: 2755
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This add-on board enables a Raspberry Pi B+, Pi A+, Pi 2 or Pi 3 to drive a pair of brushed DC motors. Its dual MC33926 motor drivers operate from 5 V to 28 V and can deliver a continuous 3 A (5 A peak) per motor. The default pin mappings make it easy to get started using our provided software, but the board also exposes most of the driver chips’ I/O pins for more specialized applications. This version ships as a partial kit; all surface-mount components are installed, but the included through-hole connectors are not soldered in.

Pololu item #: 2753
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 V, making it a great control option for low-voltage motors. The board can deliver a continuous 1.2 A (1.5 A peak) per motor, or a continuous 2.4 A (3 A peak) to a single motor when configured with both channels connected in parallel.

Pololu item #: 3544
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

The Romi 32U4 Control Board turns the Romi chassis into a programmable robot based on the Arduino-compatible ATmega32U4 MCU. Its features include integrated dual motor drivers, a versatile power circuit, and inertial sensors, as well as connections for quadrature encoders and an optional LCD. The board also has the ability to interface with an added Raspberry Pi, making the foundation for a complete Raspberry Pi-controlled Romi robot.

Pololu item #: 3575
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

Build your very own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ATmega32U4 MCU, motor drivers, quadrature encoders, and a full IMU. This board also has the ability to interface with a Raspberry Pi, making the foundation for a complete Raspberry Pi-controlled balancing robot. Motors and wheels are not included: choose your wheels and motors to personalize your robot.

Pololu item #: 1459
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This UL-listed 5 W, “wall wart”-style switching power adapter supplies up to 1 A at a regulated 5.25 VDC to 5 V USB devices. The AC adapter works with input voltages of 100 – 240 VAC and has an indicator LED that lets you know it is powered. It has a Type-A USB receptacle (the same as on a laptop or desktop computer) that accepts standard USB cables.

Pololu item #: 2749
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This extra-tall stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. It includes three 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+, and the extra 0.3″ of height allows for stacked boards to clear all of the components on the Raspberry Pi B+.

Pololu item #: 1953
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 18.6 mm apart, which is just the right height for mounting expansion boards with extra-tall female headers, and they have M2.5 threads that are just the right size for the Raspberry Pi’s mounting holes. These standoffs are sold in packs of 4.

Pololu item #: 2748
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This stackable 40-pin female header features two rows of 20 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×20 size is notably used on the Raspberry Pi Models A+ and B+ as well as the Raspberry Pi 2 Model B.

Pololu item #: 1037
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This connector is a double-row, 40-pin (2×20), straight female header strip designed to match 0.1" male headers.

Pololu item #: 1952
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

These hexagonal male-female aluminum standoffs are intended specifically for use with the Raspberry Pi. They keep parts spaced 11 mm apart, which is just the right height for mounting expansion boards with standard-size female headers, and they have M2.5 threads that are just the right size for the Raspberry Pi’s mounting holes. These standoffs are sold in packs of 4.

Pololu item #: 2747
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This extra-tall stackable 26-pin female header features two rows of 13 pins spaced with a 0.1″ (2.54 mm) pitch. It includes two 0.1″-thick spacers for additional clearance, and the extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×13 size is notably used on the Raspberry Pi Models A and B, and the extra 0.2″ of height allows for stacked boards to clear most of the tall components on the Raspberry Pi.

Pololu item #: 2746
Temporarily out of stock. See product page to backorder.
Out of stock.
Quantity:

This stackable 26-pin female header features two rows of 13 pins spaced with a 0.1″ (2.54 mm) pitch. The extended pins allow multiple units to be stacked as popularized on Arduino shields. The 2×13 size is notably used on the Raspberry Pi Models A and B.

Related Categories

Programmable Controllers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors