With their integrated WS2811/WS2812 LED drivers, these addressable RGB LEDs and LED strips are an easy way to add complex lighting effects to your project. Their high-speed one-wire interface allows you to control a large number of LEDs with a single I/O pin.
Products in category “LEDs”
This is a medium-power LED controller for up to 24 independent channels of LEDs (or 8 RGB LEDs), featuring 12-bit digital brightness control with up to 20 mA per channel. The board is based on the Texas Instruments TLC5947, which supports voltages of up to 30 V, so each channel can be connected to a chain of several LEDs for bright displays (up to 14 W total LED power). Multiple OctoBrite modules can be chained together to create large LED displays.
The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a single microcontroller to create large LED displays.
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your next project.
The Parallax ColorPAL combines an RGB LED, a light sensor, and a microcontroller to make a color sensor that can also be used as an ambient light detector and a color generator. Readings are reported via a 1-wire asynchronous serial interface.
This small IR remote control emits a 38 kHz modulated IR signal that can be used to control a robot or other electronics project from across the room. It has 21 buttons, including directional and number entry buttons.
This multi-color LED contains red, green, and blue elements that can be mixed to produce any color. Unlike many other RGB LEDs, this unit has a diffused white lens that blends the colors without any additional diffusers or reflectors.
This is a basic, general-purpose blue LED in a standard T1 (3mm) package with 0.1" lead spacing.
This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.
This is a basic, general-purpose green LED in a standard T1 (3mm) package with 0.1" lead spacing.
This is a basic, general-purpose yellow LED in a standard T1 (3mm) package with 0.1" lead spacing.