A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (SMT Components Only)

Pololu item #: 3116
Brand: Pololu
Status: Active and Preferred 
RoHS 3 compliant

Price break Unit price (US$)
1 29.95
5 27.55
25 25.35
100 23.32


backorders allowed

This programmable module is designed to be the core of a small robot, either as an auxiliary controller atop a Raspberry Pi base or as a complete control solution on its own. Its ATmega32U4 AVR microcontroller comes preloaded with an Arduino-compatible bootloader. On-board hardware includes dual motor drivers that can deliver 1.8 A per channel and an efficient voltage regulator that allows the controller to work with a 2.7 V to 11 V input voltage, along with level shifters that enable it to interface with a Raspberry Pi. This version (item #3116) does not include any through-hole components or connectors, allowing for customized assembly or standalone use.

 Description Specs (19) Pictures (12) Resources (22) FAQs (0) On the blog (3) 

Overview

A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge, bottom view with dimensions.

The A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge is a programmable module well-suited for robotics applications, designed to work either as an auxiliary controller mounted to a Raspberry Pi or as a standalone control solution for a small robot. This A-Star (abbreviated A*) is based on the ATmega32U4 AVR microcontroller from Microchip (formerly Atmel), which has built-in USB functionality, and it ships with a preloaded Arduino-compatible bootloader. Its complement of peripheral hardware includes dual motor drivers capable of delivering a continuous 1.8 A per channel, along with pushbuttons, LEDs, and an optional buzzer for building a user interface. An efficient switching voltage regulator allows the controller to work over a wide range of input voltages (2.7 V to 11 V).

The robot controller board conforms to the Raspberry Pi HAT specification, allowing it to be used as an add-on for a Raspberry Pi with a 40-pin GPIO header (Model B+ or newer, including Pi 3 Model B+ and Model A+) . On-board level shifters make it easy to set up I²C communication and interface other signals between the two controllers, and the A-Star automatically supplies 5 V power to an attached Raspberry Pi. In this setup, the Raspberry Pi can handle the high-level robot control while relying on the A-Star for low-level tasks like reading analog sensors and controlling timing-sensitive devices (e.g. servos).

We provide a library that helps establish communication between the A-Star and a Raspberry Pi, as well as a tutorial that demonstrates how to use the library and its included example code to build such a robot.

Our comprehensive user’s guide provides the basics you need to get started with the A-Star as well as detailed technical information for advanced users.

This product requires a USB A to Micro-B cable (not included) to connect to a computer.

Driving motors with an A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge on a Raspberry Pi Model B+ or Pi 2 Model B.

A-Star 32U4 Robot Controller LV (2.7 V to 11 V) configurations:

A-Star 32U4 Robot Controller SV (5.5 V to 36 V) configurations:

Features

  • Dimensions: 65 mm × 56 mm (2.6″ × 2.2″)
  • Programmable ATmega32U4 MCU with 32 KB flash, 2.5 KB SRAM, 1 KB EEPROM, and native full-speed USB (clocked by precision 16 MHz crystal oscillator)
  • Preloaded with Arduino-compatible bootloader (no external programmer required)
  • All 26 general-purpose I/O lines from the ATmega32U4 are broken out (including PB0, PD5, and PE2); 7 of these can be used as hardware PWM outputs and 12 of these can be used as analog inputs (some I/O lines are used by on-board hardware)
  • Convenient 0.1″-spaced power, ground, and signal connection points
  • Dual bidirectional DRV8838 motor drivers (1.8 A per channel)
  • Buzzer option for simple sounds and music
  • 3 user-controllable LEDs
  • 3 user pushbuttons
  • Reset button
  • Level shifters for interfacing 5 V logic to 3.3 V Raspberry Pi
  • Power features:
    • 5 V power can be sourced from USB or from a 2.7 V to 11 V external supply through on-board regulator (with several access points for connecting external power)
    • Switching 5 V regulator enables efficient operation
    • Power switch for external power inputs
    • Reverse-voltage protection on external power inputs
    • Power selection circuit allows for seamless switching between power sources while providing overcurrent protection, and feedback about which power source is selected
    • Provides 5 V power to Raspberry Pi
  • 6-pin ISP header for use with an external programmer
  • Comprehensive user’s guide

Details for item #3116

A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (SMT components only).

This version of the A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (2.7 V to 11 V input voltage) does not include any through-hole components. It ships as shown in the picture above, without any male or female headers, terminal blocks, DC power jack, buzzer, or Raspberry Pi mounting hardware. This configuration is intended for those who want to use the board as a standalone robot controller or customize the way it is assembled for use with a Raspberry Pi, such as by installing a stackable 2×20-pin female header in order to continue to have access to the Raspberry Pi’s 40 GPIO pins while the A-Star is plugged in. If you want to use this version with the Raspberry Pi, we recommend you also get 11 mm M2.5 standoffs along with compatible nuts and screws.

For a version assembled with selected through-hole parts for use as a Raspberry Pi add-on and with mounting hardware included, see item #3117.

A-Star 32U4 Robot Controller LV 5 V regulator

A major feature of the A* Robot Controller LV is its power system, which allows it to efficiently operate from a 2.7 V to 11 V external source and provide power to an attached Raspberry Pi. The input voltage is regulated to 5 V by a TPS63061 switching step-up/step-down (buck-boost) converter from Texas Instruments. (We also make a standalone regulator based on this integrated circuit.) The regulator’s flexibility in input voltage is especially well-suited for battery-powered applications in which the battery voltage begins above 5 V and drops below 5 V as the battery discharges. Without the typical restriction on the battery voltage staying above 5 V throughout its life, a wider range of battery types can be considered. For example:

  • A 4-cell battery holder, which might have a 6 V output with fresh alkalines or a 4.0 V output with partially discharged NiMH cells, can be used to power this A*.
  • A disposable 9 V battery powering the board can be discharged to under 3 V instead of cutting out at 6 V, as with typical linear or step-down regulators.

As shown in the left graph below, the LV’s 5 V switching regulator has an efficiency – defined as (Power out)/(Power in) – of 80% to 90% for most combinations of input voltage and load.

The A-Star’s components, including the microcontroller and LEDs, draw 30 mA to 40 mA in typical applications (without the buzzer). The rest of the regulator’s achievable output current, which depends on input voltage as well as ambient conditions, can be used to power other devices; this can include an attached Raspberry Pi (which typically draws a few hundred milliamps). The blue line in the right graph above shows output currents at which the voltage regulator’s over-temperature protection typically kicks in after a few seconds. These currents represent the limit of the regulator’s capability and cannot be sustained for long periods; under typical operating conditions, a safe limit for the maximum continuous regulator output current is 60% to 70% of the values shown in the graph.

Arduino compatibility

Like our other A-Star 32U4 programmable controllers, the A-Star 32U4 Robot Controller ships with a preloaded Arduino-compatible bootloader (which uses 4 KB of flash memory, leaving 28 KB available for the user program). We provide a software add-on that enables the board to be easily programmed from the Arduino environment and an Arduino library to make it easy to use the additional on-board hardware.

The A-Star 32U4 Robot Controller has the same microcontroller as the Arduino Leonardo and Arduino Micro, and it runs at the same frequency, so most code examples intended for those boards should also work on the A-Star.

The A-Star family

The A-Star 32U4 Robot Controller is a part of our larger A-Star 32U4 family, all of whose members are based on the same ATmega32U4 microcontroller, feature native USB interfaces, and are preloaded with Arduino-compatible bootloaders. The table below shows some key features and specifications of our A-Star microcontroller boards to help you choose the right one for your application.







A-Star 328PB Micro A-Star 32U4 Micro A-Star 32U4 Mini ULV

A-Star 32U4 Mini LV

A-Star 32U4 Mini SV
A-Star 32U4 Prime LV

A-Star 32U4 Prime SV
A-Star 32U4 Robot Controller LV

A-Star 32U4 Robot Controller SV
Microcontroller: ATmega328PB ATmega32U4
User I/O lines: 24 18 26 26(1) 26(1)
Available PWM outputs: 9 6 7 7 7(1)
Analog inputs: 8 8 12 12 12(1)
Ground access points: 6 2 4 43 44
User LEDs: 1 2 3 3 3
User pushbuttons: 3 3
USB interface: yes yes yes yes
Reset button: yes   yes yes yes
Power switch:     yes yes
Buzzer option:     yes yes
microSD option:     yes  
LCD option:     yes  
Motor drivers:       yes
Operating voltage: 3.3V VCC: 3.8 V to 15 V
5V VCC: 5.5 V to 15 V
5.5 V to 15 V ULV: 0.5 V to 5.5 V
LV: 2.7 V to 11.8 V
SV: 5 V to 40 V
LV: 2 V to 16 V
SV: 5 V to 36 V
LV: 2.7 V to 11 V
SV: 5.5 V to 36 V
Regulator type: 3.3 V or 5 V linear 5 V linear 5 V switching

ULV: step-up
LV: step-up/step-down
SV: step-down
5 V switching

LV: step-up/step-down
SV: step-down
5 V switching

LV: step-up/step-down
SV: step-down
Regulated current:(2) 100 mA 100 mA ULV: 500 mA
LV: 1 A
SV: 800 mA
LV: 1.8 A
SV: 1 A
LV: 1 A
SV: 1.5 A
Dimensions: 1.3″ × 0.7″ 1″ × 0.6″ 1.9″ × 0.7″ 2.8″ × 2.1″ 2.6″ × 2.2″
Weight: 1.5 g(3) 1.3 g(3) 3.4 g(3) 13 g to 33 g 14 g to 23 g
Price: $8.95 $16.95 $24.95 to $24.95 $24.95 to $39.95 $29.95 to $39.95
1 Some microcontroller resources are used by on-board hardware.
2 These values are rough approximations for comparison purposes. Available current depends on input voltage, current consumed by the board, ambient conditions, and regulator topology. See product documentation and performance graphs for details.
3 Without included optional headers.

People often buy this product together with:

Solarbotics RW2 Wheel (external set screw) Solarbotics RW2 Wheel (external set screw)
9mm Electromagnetic Buzzer: 30Ω, 3-7V, Side Opening 9mm Electromagnetic Buzzer: 30Ω, 3-7V, Side Opening
QTR-1RC Reflectance Sensor (2-Pack) QTR-1RC Reflectance Sensor (2-Pack)

Related Products

A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge
A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge (SMT Components Only)
A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge
Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
Pololu USB AVR Programmer v2.1
Wall Power Adapter: 5VDC, 1A, 5.5×2.1mm Barrel Jack, Center-Positive
Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi
Pololu Dual MC33926 Motor Driver for Raspberry Pi (Assembled)
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
DC Power Adapter Barrel Jack
9mm Electromagnetic Buzzer: 30Ω, 3-7V, Side Opening
9mm Electromagnetic Buzzer: 40Ω, 4-6V, Top Opening
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Shorting Block: Blue, Top Closed
Aluminum Standoff for Raspberry Pi: 11mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Stackable 0.100″ Female Header: 2x20-Pin, Straight
0.100" (2.54 mm) Female Header: 2x20-Pin, Straight
Aluminum Standoff for Raspberry Pi: 18.6mm Length, 6mm M2.5 Thread, M-F (4-Pack)
Stackable 0.100″ Female Header with Extra 0.3″ Spacer: 2x20-Pin, Straight
Machine Screw: M2.5, 6mm Length, Phillips (25-pack)
Machine Hex Nut: M2.5 (25-pack)
DRV8838 Single Brushed DC Motor Driver Carrier
A-Star 32U4 Prime LV microSD with LCD
A-Star 32U4 Mini LV
A-Star 32U4 Micro
Zumo 32U4 OLED Robot Kit (No Motors)

Related Categories

Robot Controllers
Raspberry Pi Expansion Boards
A-Star 32U4 Robot Controller
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Sensors
Micro Metal Gearmotors
Pololu Plastic Gearmotors
Motors and Gearboxes
RC Servos
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Connectors
Regulators and Power Supplies
Zumo 32U4 OLED Robot
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors