From the Pololu Forum: this robot based on a 3pi also contains a Baby Orangutan that is wirelessly programmed using a pair of Wixels.

Featured link: http://forum.pololu.com/viewtopic.php?p=27590#p27590

This head tracking project uses a MinIMU-9 v2 and an Arduino to mimic the movement of a person in a computer-generated model.

Featured link: http://www.youtube.com/watch?v=j5f9RDcgois

This self-balancing by Sebastian Nilsson robot uses a 37D metal gearmotor with encoder and a pair of Pololu 90×10mm wheels.

Featured link: http://sebastiannilsson.com/en/k/projekt/selfbalancing-robot/

This Raspberry Pi-based robot’s motors are driven with a TB6612FNG motor driver carrier.

Featured link: https://projects.drogon.net/adafruit-protoplate-for-the-rasbperry-pi/

This group of robots by Brian Patton features a Maestro 24 controlling 22 servos to create a rendition of Row Row Row Your Boat.

Featured link: http://www.youtube.com/watch?v=uF5MCNPWZ5g

The LightRobot is a 3pi Robot that has been modified with RGB LEDs, an RN-41 Bluetooth module, and a sonar range finder that is controlled with voice commands and the accelerometer from an Android phone. The source code for the robot and the Android app are also available on the project’s GitHub page.

Featured link: http://www.youtube.com/watch?v=hJi5qhOgbXw

This text-enabled espresso machine uses the Zipwhip app to receive a text message for an order of espresso. An A4988 stepper motor driver carrier and servo are then used to rotate the cup up to the nozzles where the espresso is dispensed.

Related products

A4988 Stepper Motor Driver Carrier

This blog post is a very detailed writeup of some A4988 stepper motor driver heatsinking experiments.

Featured link: http://arduinodabbler.wordpress.com/2012/07/13/heatsinking-a-pololu-a4988-a4983-stepper-driver/

This post in the Trossen Robotics Community forum shows a pair of Wixels are added to an Arbotix Commander V2 remote control, allowing it to send its signals to a computer. The author gives us a nice compliment:

Not to be a shill, but that was easier to set up than any MCU + Xbee configuration I’ve seen.

Featured link: http://forums.trossenrobotics.com/showthread.php?5558-Pololu-s-Wixel-Arbotix-Commander-V2

This autonomous, obstacle-avoiding robot is controlled by an Arduino and uses two 25D metal gearmotors, which are attached to a dual VNH2SP30 motor driver carrier.