Pololu Metal Gearmotors » 25D mm Metal Gearmotors » 6V Low-Power (LP) 25D mm Gearmotors »
378:1 Metal Gearmotor 25Dx58L mm LP 6V
This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 377.93:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.
Key specs at 6 V: 15 RPM and 250 mA (max) free-run, 300 oz-in (22 kg-cm) and 2.4 A stall.
You can use the following selection boxes to choose from all of our 25D metal gearmotor versions:
Alternatives available with variations in these parameter(s): gear ratio motor type encoders? Select variant…
Compare all products in 6V Low-Power (LP) 25D mm Gearmotors.
| Description | Specs (10) | Pictures (12) | Resources (4) | FAQs (2) | On the blog (0) |
|---|
|
25D mm metal gearmotor. |
|---|
 |
25D mm metal gearmotor with 48 CPR encoder. |
|---|
 |
25D mm metal gearmotor with 48 CPR encoder. |
|---|
 |
25D mm metal gearmotor with 48 CPR encoder: close-up view of encoder. |
|---|
 |
Pololu 25D mm gearmotor with bracket. |
|---|
 |
Pololu 60×8mm wheel on a Pololu 25D mm metal gearmotor. |
|---|
 |
12mm Hex Wheel Adapter for 4mm Shaft on a 20D mm Metal Gearmotor. |
|---|
 |
Dagu Wild Thumper wheel 120×60mm (chrome) with Pololu 25D mm metal gearmotor. |
|---|
 |
Partially disassembled Dagu Wild Thumper 6WD chassis with one of the gearmotors visible. |
|---|
 |
Dimensions of the Pololu 25D mm metal gearmotors. Units are mm over [inches]. |
|---|
 |
Encoder A and B outputs for 25D mm HP 6V metal gearmotor with 48 CPR encoder (motor running at 6 V). |
|---|
 |
Encoder A and B outputs for 25D mm LP 6V metal gearmotor with 48 CPR encoder (motor running at 6 V). |
|---|
Related products
Home | Forum | Blog | Support | Ordering Information | Wish Lists | Distributors | BIG Order Form | About | Contact
© 2001–2018 Pololu Corporation
