Pololu Metal Gearmotors » Micro Metal Gearmotors » 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors »
298:1 Micro Metal Gearmotor HPCB 12V with 12 CPR Encoder, Back Connector
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft. Cables sold separately.
motor/brush type | gearbox | encoder | |
---|---|---|---|
HPCB 12V: high-power 12V with carbon brushes | 297.92:1 with brass plates | 12 CPR incremental quadrature with back connector |
voltage | no-load performance | stall extrapolation* |
---|---|---|
12 V | 110 RPM, 80 mA | 3.3 kg⋅cm (45 oz⋅in), 0.75 A |
* Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. |
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors.
Description | Specs (20) | Pictures (26) | Resources (3) | FAQs (0) | On the blog (0) |
---|
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
---|
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
---|
Micro Metal Gearmotor with 12 CPR encoder, back connector (cable not included). |
---|
Micro Metal Gearmotor with 12 CPR encoder, side connector (cable not included). |
---|
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
---|
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
---|
Micro Metal Gearmotor with 12 CPR encoder. |
---|
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
---|
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
---|
Micro Metal Gearmotor with 12 CPR encoder, back connector. |
---|
Micro Metal Gearmotor with 12 CPR encoder, side connector. |
---|
Rear view of Micro Metal Gearmotor with 12 CPR encoder, back connector. |
---|
Rear view of Micro Metal Gearmotor with 12 CPR encoder, side connector. |
---|
Pin 1 (M1) on the Micro Metal Gearmotors with encoders. |
---|
Encoder A and B outputs of a magnetic encoder on a high-power (HP) 6V Micro Metal Gearmotor running at 6 V. |
---|
Schematic diagram of the integrated Micro Metal Gearmotor encoder. |
---|
Micro Metal Gearmotor next to a US quarter dollar for size reference. |
---|
Micro Metal Gearmotor size comparison of 1000:1 (bottom) vs other gear ratios (top). |
---|
Micro Metal Gearmotor (standard version without encoder or extended motor shaft). |
---|
Micro Metal Gearmotor with extended motor shaft. |
---|
Micro Metal Gearmotor HPCB long-life carbon brushes (left) next to Micro Metal Gearmotor HP precious metal brushes (right). |
---|
Pololu Wheel 32×7mm on a Micro Metal Gearmotor. |
---|
12mm Hex Wheel Adapter for 3mm Shaft on a Micro Metal Gearmotor. |
---|
Micro Metal Gearmotor mounted to a piece of acrylic with black mounting bracket version. |
---|
Micro Metal Gearmotor mounted to a piece of acrylic with black mounting bracket version. |
---|
37D mm Metal Gearmotor next to a Micro Metal Gearmotor for size comparison. |
---|