6-Pin JST SH-Style Connector Boards

Products in category “6-Pin JST SH-Style Connector Boards”

Pololu item #: 4770
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes. It works with our assortment of 6-pin female JST SH-style cables and can be used to more easily access the pins of our Micro Metal Gearmotor Encoders with top-entry and side-entry connectors. The silkscreen on the bottom side of the board is labeled with this specific application in mind, indicating which pin on the breakout board would correspond to which pin on the encoder.

This version features a top-entry connector and is individually packaged and fully tested.

Pololu item #: 4771
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes. It works with our assortment of 6-pin female JST SH-style cables and can be used to more easily access the pins of our Micro Metal Gearmotor Encoders with top-entry and side-entry connectors. The silkscreen on the bottom side of the board is labeled with this specific application in mind, indicating which pin on the breakout board would correspond to which pin on the encoder.

This product is a 3-pack of breakout boards with top-entry connectors that are optically inspected but not electrically tested.

Pololu item #: 4772
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes. It works with our assortment of 6-pin female JST SH-style cables and can be used to more easily access the pins of our Micro Metal Gearmotor Encoders with top-entry and side-entry connectors. The silkscreen on the bottom side of the board is labeled with this specific application in mind, indicating which pin on the breakout board would correspond to which pin on the encoder.

This version features a side-entry connector and is individually packaged and fully tested.

Pololu item #: 4773
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant
Out of stock.
Quantity:

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes. It works with our assortment of 6-pin female JST SH-style cables and can be used to more easily access the pins of our Micro Metal Gearmotor Encoders with top-entry and side-entry connectors. The silkscreen on the bottom side of the board is labeled with this specific application in mind, indicating which pin on the breakout board would correspond to which pin on the encoder.

This product is a 3-pack of breakout boards with side-entry connectors that are optically inspected but not electrically tested.

New Products

Motoron M1T256 Single I²C Motor Controller (Header Pins Soldered)
Motoron M2H24v16 Dual High-Power Motor Controller for Raspberry Pi (Connectors Soldered)
Motoron M2H18v18 Dual High-Power Motor Controller for Raspberry Pi (No Connectors or Standoffs)
Motoron M3H256 Triple Motor Controller for Raspberry Pi (Connectors Soldered)
Ribbon Cable Premium Jumper Wires 10-Color F-F 24" (60 cm)
6V Step-Up Voltage Regulator U3V16F6
Motoron M2S18v20 Dual High-Power Motor Controller Shield for Arduino (No Connectors)
Motoron M2U256 Dual Serial Motor Controller
DRV8434A Stepper Motor Driver Carrier (Header Pins Soldered)
Motoron M2H18v20 Dual High-Power Motor Controller Kit for Raspberry Pi
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors