Electronics » Regulators and Power Supplies » Step-Up (Boost) Voltage Regulators »
Pololu 3.3V Step-Up Voltage Regulator U1V10F3
This tiny (0.35″×0.45″) U1V10F3 switching step-up (or boost) voltage regulator efficiently generates 3.3 V from input voltages as low as 0.5 V. Unlike most boost regulators, the U1V10F3 automatically switches to a linear down-regulation mode when the input voltage exceeds the output. The pins have a 0.1″ spacing, making this board compatible with standard solderless breadboards and perfboards.
Alternatives available with variations in these parameter(s): output voltage Select variant…
Description | Specs (10) | Pictures (5) | Resources (5) | FAQs (0) | On the blog (0) |
---|
Dimensions
Size: | 0.35″ × 0.45″ × 0.1″1 |
---|---|
Weight: | 0.4 g1 |
General specifications
Minimum operating voltage: | 0.5 V |
---|---|
Maximum operating voltage: | 5.5 V |
Maximum input current: | 1.2 A2 |
Output voltage: | 3.3 V |
Reverse voltage protection?: | N |
Maximum quiescent current: | 1 mA3 |
Identifying markings
PCB dev codes: | reg12b |
---|---|
Other PCB markings: | 0J7517 |
Notes:
- 1
- Without included optional headers.
- 2
- Regulator may overheat at lower input currents when VIN is much lower than VOUT. Available output current is a function of VIN, VOUT, and the regulator efficiency.
- 3
- The highest quiescent currents occur at very low input voltages; for most of the input voltage range, the quiescent current is well below 1 mA.