499:1 Metal Gearmotor 25Dx70L mm LP 6V with 48 CPR Encoder (No End Cap)
Clearance: This is being replaced by a functionally identical version that has a removable protective end cap over the encoder.
This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 498.87:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 23,945.84 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.
|voltage||no-load performance||stall extrapolation|
|6 V||11 RPM, 250 mA||30 kg⋅cm (400 oz⋅in), 2.4 A|
You can use the following selection boxes to choose from all of our 25D metal gearmotor versions:
Alternatives available with variations in these parameter(s): gear ratio motor type encoders?
|Description||Specs (11)||Pictures (14)||Resources (4)||FAQs (2)||On the blog (0)|
- Dimension diagram of Pololu 25D mm Metal Gearmotors (223k pdf)
- 3D models of 25D mm gearmotors (9MB zip)
- This file contains 3D models (in the step file format) of the 25D mm gearmotors with and without encoders.
- Modifying the Wild Thumper to use motors with encoders (3MB pdf)
Note: This is not an easy modification, and the chassis can be damaged if it is not done properly, so we generally recommend against it, and we can only provide very limited support for those who want to attempt it. The manufacturer did not intend for the chassis to be modified in this way, and we do not know how well such a modification will work out.