Electronics » Motion Control Modules » Brushed DC Motor Drivers »
DRV8833 Dual Motor Driver Carrier
This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage motors.
| Description | Specs (12) | Pictures (7) | Resources (5) | FAQs (0) | On the blog (3) | Distributors (63) |
|---|
Dimensions
| Size: | 0.5″ × 0.8″1 |
|---|---|
| Weight: | 1.0 g1 |
General specifications
| Motor driver: | DRV8833 |
|---|---|
| Motor channels: | 2 |
| Minimum operating voltage: | 2.7 V |
| Maximum operating voltage: | 10.8 V |
| Continuous output current per channel: | 1.2 A2 |
| Peak output current per channel: | 2 A |
| Continuous paralleled output current: | 2.4 A2 |
| Reverse voltage protection?: | Y |
Identifying markings
| PCB dev codes: | md17a |
|---|---|
| Other PCB markings: | 0J3762 |
Notes:
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
