DRV8833 Dual Motor Driver Carrier

DRV8833 Dual Motor Driver Carrier
Pololu item #: 2130 601 in stock

Price break Unit price (US$)
1 4.95
5 4.25
25 3.75
100 3.49


backorders allowed

This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering small, low-voltage motors.

 Description Specs (10) Pictures (7) Resources (2) FAQs (0) On the blog (2) 
DRV8833 dual motor driver carrier with included hardware.

DRV8833 dual motor driver carrier with included hardware.

DRV8833 dual motor driver carrier, bottom view with dimensions.

DRV8833 dual motor driver carrier, bottom view with dimensions.

DRV8833 dual motor driver carrier, labeled top view.

DRV8833 dual motor driver carrier, labeled top view.

Minimal wiring diagram for connecting a microcontroller to a DRV8833 dual motor driver carrier.

Minimal wiring diagram for connecting a microcontroller to a DRV8833 dual motor driver carrier.

Locations of necessary modifications to enable current limiting on a DRV8833 dual motor driver carrier.

Locations of necessary modifications to enable current limiting on a DRV8833 dual motor driver carrier.

Two DRV8833 dual motor driver carriers plugged into a breadboard.

Two DRV8833 dual motor driver carriers plugged into a breadboard.

Schematic diagram of the DRV8833 dual motor driver carrier.

Schematic diagram of the DRV8833 dual motor driver carrier.


Related Products

Pololu DRV8835 Dual Motor Driver Shield for Arduino
DRV8835 Dual Motor Driver Carrier
A4990 Dual Motor Driver Carrier
DRV8838 Single Brushed DC Motor Driver Carrier
BD65496MUV Single Brushed DC Motor Driver Carrier
DRV8801 Single Brushed DC Motor Driver Carrier
TB6612FNG Dual Motor Driver Carrier
100:1 Micro Metal Gearmotor
Pololu Qik 2s9v1 Dual Serial Motor Controller
Brushed DC Motor: 130-Size, 6V, 11.5kRPM, 800mA Stall
120:1 Plastic Gearmotor, 90° Output
115:1 Metal Gearmotor 15.5Dx30L mm
120:1 Mini Plastic Gearmotor, Offset 3mm D-Shaft Output
26:1 Sub-Micro Plastic Planetary Gearmotor 6Dx16L mm
Tamiya 70190 Mini Motor Multi-Ratio Gearbox (12-Speed) Kit
Tamiya 70168 Double Gearbox Kit
ACS714 Current Sensor Carrier -5A to +5A
Stepper Motor: Bipolar, 200 Steps/Rev, 35×26mm, 7.4V, 0.28 A/Phase
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

Brushed DC Motor Drivers
Programmable Controllers
Pololu Metal Gearmotors
Pololu Plastic Gearmotors
Female-Female Premium Jumper Wires
Wires with Pre-crimped Terminals
Solderless Breadboards
Stepper Motors
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors