Posts by Ryan (Page 9)

You are currently viewing a selection of posts from the Pololu Blog. You can also view all the posts.

Popular tags: community projects new products raspberry pi arduino more…

Qtechknow wins Educator's Choice award at Maker Faire

Posted by Ryan on 25 September 2013

We saw a tweet from Atmel that Qtechknow’s Fuzzbot—a robot based on a Zumo that helps clean floors by dragging a dust cloth around while avoiding obstacles—won the New York 2013 World Maker Faire Educator’s Choice award. Qtechknow was recently featured in a Popular Science article.

Related post: Fuzzbot

Underwater Vehicle for MATE ROV Competition

Posted by Ryan on 27 June 2013

The AMNO & CO ROV team uses our Simple Motor Controllers in their remotely operated underwater vehicle. The team placed 13th at the 12th Annual MATE International ROV Competition (and 2nd in regionals)!

Featured link: https://www.facebook.com/AMNOandCoROV

Wireless Fenrir

Posted by Ryan on 23 May 2013

Fenrir, a 12-foot-tall metal fire-breathing wolf sculpture by Sheet Metal Alchemist, now has a Wixel-based wireless controller.

Featured link: https://www.youtube.com/watch?feature=player_embedded&v=Z78yYVYq6mY

Barobo Linkbot

Posted by Ryan on 22 May 2013

Check out this kickstarter: the Linkbot modular robot by Barobo uses Pololu motors.

Featured link: http://www.kickstarter.com/projects/barobo/linkbot-create-with-robots

VertiBOT

Posted by Ryan on 13 May 2013

VertiBot is a neatly-constructed balancing robot. Pololu metal gearmotors, wheels, and a Qik dual serial motor controller were used for this project.

Featured link: http://madebyfrutos.wordpress.com/2013/05/02/vertibot/

Tiny Bot

Posted by Ryan on 3 May 2013

Tiny Bot, by Erik Kringen, is an autonomous obstacle-avoiding robot tank that uses a Pololu track set.

Featured link: http://www.mycontraption.com/introducing-tiny-bot/

PiBBOT

Posted by Ryan on 3 May 2013

This balancing robot by Mark Williams is controlled by a Raspberry Pi. The project web page explains the balance control algorithm. PiBBOT uses a Pololu MinIMU-9 v2, metal gearmotors with encoders, and Pololu wheels.

Featured link: http://marks-space.com/2013/04/18/success-with-a-balancing-robot-using-a-raspberry-pi/

Rice University's r-one research robot

Posted by Ryan on 3 May 2013

This r-one research robot was designed to be low cost, so that researchers in the Multi-Robot Systems Lab at Rice University could make a swarm of robots. It uses our brackets, wheels and ball casters, and motors.

Featured link: http://mrsl.rice.edu/projects/r-one

Liquid Lifebar

Posted by Ryan on 3 May 2013

This gadget uses a Pololu Jrk and a linear actuator to help control the level of water in the tube, which can indicate the life of a video game character.

Featured link: http://www.youtube.com/watch?v=ywfZsYApj_M

New Products

JST SH-Style Connector Board for Micro Metal Gearmotors, 2-Pin, Back-Entry (2-Pack)
ACS37041KLHBLT-030B3 Current Sensor Micro Carrier -30A to +30A, 3.3V
Pololu Reverse Voltage Protector, 4-60V, 25A
Pololu I²C Isolator with Isolated Power, ISO1640, MIE1W0505BGLVH, 5V/3.3V, 200mA
0.100″ (2.54 mm) Breakaway Male Header: 1×10-Pin, Straight, Black, 25-Pack
JST SH-Style Cable, 2-Pin, Single-Ended Female, 30cm
JST SH-Style Cable, 4-Pin, Female-Female, 10cm
JST PH-Style Cable with Female Pins for 0.1" Housings, 3-Pin, 75cm
JST PH-Style Cable with Female Pins for 0.1" Housings, 4-Pin, 12cm
JST SH-Style Cable, 4-Pin, Single-Ended Female, 75cm
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors