Pololu Blog »

Tiny Bot

Posted by Ryan on 3 May 2013

Tiny Bot, by Erik Kringen, is an autonomous obstacle-avoiding robot tank that uses a Pololu track set.

PiBBOT
by Ryan - 3 May 2013
This balancing robot by Mark Williams is controlled by a Raspberry Pi. The project web page explains the balance control algorithm. PiBBOT uses a...

VertiBOT
by Ryan - 13 May 2013
VertiBot is a neatly-constructed balancing robot. Pololu metal gearmotors, wheels, and a Qik dual serial motor controller were used for this project.

Using your Pololu account allows you to customize your avatar and manage your comments; you can also post anonymously.

I have a password.

I forgot my password.

Email:
CAPTCHA:	Need help with this form? Please contact us.

I am a new customer.

First name:
Middle name (optional):
Last name:
Email:
Password:
Re-type password:
CAPTCHA:	Need help with this form? Please contact us.

I want to post anonymously.

CAPTCHA:	Need help with this form? Please contact us.

	Log In \| My Account \| \| Shopping Cart US toll free: 1-877-7-POLOLU ~ (702) 262-6648 Same-day shipping, worldwide
Catalog		Forum		Blog		Support		Ordering		Distributors		About		Contact

US toll free: 1-877-7-POLOLU ~ (702) 262-6648
Same-day shipping, worldwide

	Pololu Isolated Solid State Relay/Switch, SPST, 100V, 4.5A
	ACS37042KLHBLT-010B5 Current Sensor Micro Carrier -10A to +10A, 5V
	QTRXL-MD-01RC-S Reflectance Sensor: 1-Channel, 8mm Wide, RC Output, Long Range, Side-Entry Connector
	APM81815 Step-Down Voltage Regulator Carrier, 5V Out
	0.100″ (2.54 mm) Breakaway Male Header: 1×2-Pin, Straight, Black, 100-Pack
	24V Step-Up Voltage Regulator U3V9F24
	JST PH-Style Cable with Female Pins for 0.1" Housings, 5-Pin, 30cm
	Glideforce GF01-120501-1-66 Micro Linear Actuator with Limit Switches: 12V, 2.2kgf, 28mm/s, 10mm Stroke
	ACS37041KLHBLT-010B3 Current Sensor Micro Carrier -10A to +10A, 3.3V
	Pololu Digital Distance Sensor v2, 10cm, Side-Entry Connector