Pololu Ball Caster with 1″ Plastic Ball (old version)
This light ball caster uses a 1″ diameter plastic ball. The height of the assembled kit ranges from 1.1″ to 1.4″. Dowel pins are used to minimize the friction between the ball and the ABS housing.
|Description||Specs (3)||Pictures (3)||Resources (0)||FAQs (1)||On the blog (0)|
Note: We have released an improved ball caster with 1″ plastic ball that we recommend over this older version for applications that are not somehow specifically tied to this item #956 design. The new version is available with better plastic rollers or with ball bearings and it holds the ball more securely.
This ball caster kit includes a black ABS housing, a 1″ diameter plastic ball, three dowel pin rollers, two spacers (1/16″ and 1/8″ thick), and three #2 screw sets. The total height of the ball caster, 1.1″, can be increased to about 1.3″ using the included spacers. The three included #2 screws can be used to mount the ball caster to your chassis (the distance between the screw holes is 0.69″).
Note that our ball casters are designed for small robots; they are not intended to bear more than a few pounds. With more weight than this, friction between the ball and the housing will probably keep it from rolling well.
Comparison of Pololu ball casters
Pololu ball casters with plastic and metal balls. Ball diameter from left to right: 1″, 3/4″, 1/2″, and 3/8″.
Pololu ball caster
1″ plastic ball (old version)
People often buy this product together with:
|Pololu Ball Caster with 3/4″ Metal Ball|
|Pololu Micro Metal Gearmotor Bracket Extended Pair|
|Pololu Wheel 42×19mm Pair|