Motion Control Modules » Brushed DC Motor Drivers » Pololu High-Power Motor Drivers »
Pololu G2 High-Power Motor Driver 24v30 CS
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power brushed DC motor. The 1.9″ × 1.7″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver up to around 30 A continuous without a heat sink. Additional features include reverse-voltage protection, basic current limiting, and an on-board current sensor that provides a direct measurement of the motor current.
Compare all products in Pololu High-Power Motor Drivers or Single-Channel G2 and H2 High-Power Motor Drivers.
| Description | Specs (14) | Pictures (15) | Resources (3) | FAQs (1) | On the blog (0) | Distributors (3) |
|---|
- Some discrete MOSFET based H-bridges are unable to handle a continuously high PWM signal (100% duty cycle). This has to do with bootstrap capacitors not having enough time to charge. Does this bridge allow 100% duty cycle PWM input?
- Yes. The design has an extra charge pump that allows the high-side MOSFETs to stay on indefinitely for 100% duty cycle operation.
Related products
Related categories
Coupon Discount
25THANVC254: Get 25% off one or more items from category G2 and H2 High-Power Motor Drivers (limit 4 per item). This offer is valid through 30 Apr 2026.
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
