Sensors » Proximity Sensors and Range Finders » Pololu Digital Distance Sensors »
Pololu Digital Distance Sensor v2 with Pulse Width Output, 50cm Max, Side-Entry Connector
This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. It works over an input voltage range of 3.0 V to 5.5 V and features a side-entry 3-pin JST SH-style connector that is compatible with our 3-pin JST SH-style cables.
Alternatives available with variations in these parameter(s): maximum range connector Select variant…
| Description | Specs (11) | Pictures (17) | Resources (4) | FAQs (0) | On the blog (0) | Distributors (0) |
|---|
File downloads
-
Dimension diagram of the Pololu Digital Distance Sensor v2 with Side-Entry Connector (286k pdf)
-
3D model of the Pololu Digital Distance Sensor v2 with Side-Entry Connector (4MB step)
-
Drill guide for the Pololu Digital Distance Sensor v2 with Side-Entry Connector (13k dxf)
This DXF drawing shows the locations of all of the board’s holes.
Recommended links
Related products
Coupon Discount
DISTSENSV2INTRO: Get 15% off one or more items from category Pololu Digital Distance Sensors (limit 3 per item). This offer expires after 100 uses. This offer is valid from 11 Jun 2025 to 30 Jun 2025.
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
