Pololu Metal Gearmotors » Micro Metal Gearmotors » 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors »
15:1 Micro Metal Gearmotor HPCB 12V
This is a miniature brushed DC metal gearmotor with a gearbox cross section of 10×12 mm and a 9 mm long, 3 mm diameter D-shaped gearbox output shaft.
motor/brush type | gearbox | encoder | |
---|---|---|---|
HPCB 12V: high-power 12V with carbon brushes | 15.25:1 with brass plates | no encoder |
voltage | no-load performance | stall extrapolation* |
---|---|---|
12 V | 2200 RPM, 80 mA | 0.25 kg⋅cm (3.5 oz⋅in), 0.75 A |
* Note: Stall torque and stall current specifications are theoretical values; stalls could damage the motor or gearbox. |
Alternatives available with variations in these parameter(s): gear ratio motor type encoder Select variant…
Compare all products in 12V High-Power Carbon Brush (HPCB) Micro Metal Gearmotors.
Description | Specs (20) | Pictures (17) | Resources (3) | FAQs (0) | On the blog (1) |
---|
Dimensions
Size: | 10 × 12 × 25 mm1 |
---|---|
Weight: | 9.5 g |
Shaft diameter: | 3 mm2 |
General specifications
Gear ratio: | 15.25:1 |
---|---|
No-load speed @ 12V: | 2200 rpm3 |
No-load current @ 12V: | 0.08 A4 |
Stall current @ 12V: | 0.75 A |
Stall torque @ 12V: | 0.25 kg·cm |
Max output power @ 12V: | 1.4 W |
No-load speed @ 6V: | 1100 rpm5 |
Stall current @ 6V: | 0.38 A5 |
Stall torque @ 6V: | 0.13 kg·cm5 |
Encoder: | no encoder |
Long-life carbon brushes?: | Y |
Motor type: | 0.75A stall @ 12V (HPCB 12V - carbon brush) |
Performance at maximum efficiency
Max efficiency @ 12V: | 37 % |
---|---|
Speed at max efficiency: | 1700 rpm |
Torque at max efficiency: | 0.059 kg·cm |
Current at max efficiency: | 0.23 A |
Output power at max efficiency: | 1.0 W |
Notes:
- 1
- Output shaft adds 10 mm to the 26 mm length. See dimension diagram for details.
- 2
- D shaft.
- 3
- Typical; ±20%.
- 4
- Typical, ±50%; no-load current depends on internal friction, which is affected by many factors, including ambient temperature and duration of motor operation.
- 5
- This motor will run at 6 V but is intended for operation at 12 V.