DRV8835 Dual Motor Driver Carrier

DRV8835 Dual Motor Driver Carrier
Pololu item #: 2135 1254 in stock

Price break Unit price (US$)
1 4.49
5 3.89
25 3.49
100 3.25


backorders allowed

This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature, this driver is a great solution for powering up to two small, low-voltage motors. The carrier board has the form factor of a 14-pin DIP package, which makes it easy to use with standard solderless breadboards and 0.1″ perfboards.

 Description Specs (13) Pictures (8) Resources (2) FAQs (0) On the blog (6) 

Dimensions

Size: 0.4″ × 0.7″1
Weight: 0.5 g1

General specifications

Motor driver: DRV8835
Motor channels: 2
Minimum operating voltage: 0 V
Maximum operating voltage: 11 V
Continuous output current per channel: 1.2 A2
Peak output current per channel: 1.5 A
Continuous paralleled output current: 2.4 A2
Maximum PWM frequency: 250 kHz
Minimum logic voltage: 2 V
Maximum logic voltage: 7 V
Reverse voltage protection?: Y

Notes:

1
Without included hardware.
2
Typical results with VIN=5 V, VCC=5 V, and 100% duty cycle at room temperature.

Related Products

Pololu DRV8835 Dual Motor Driver Shield for Arduino
Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi B+
DRV8833 Dual Motor Driver Carrier
A4990 Dual Motor Driver Carrier
TB6612FNG Dual Motor Driver Carrier
DRV8838 Single Brushed DC Motor Driver Carrier
DRV8801 Single Brushed DC Motor Driver Carrier
Pololu Low-Voltage Dual Serial Motor Controller
100:1 Micro Metal Gearmotor
Pololu Qik 2s9v1 Dual Serial Motor Controller
Brushed DC Motor: 130-Size, 6V, 11.5kRPM, 800mA Stall
120:1 Plastic Gearmotor, 90° Output
115:1 Metal Gearmotor 15.5Dx30L mm
120:1 Mini Plastic Gearmotor, Offset 3mm D-Shaft Output
26:1 Sub-Micro Plastic Planetary Gearmotor 6Dx16L mm
Tamiya 70190 Mini Motor Multi-Ratio Gearbox (12-Speed) Kit
Tamiya 70168 Double Gearbox Kit
ACS714 Current Sensor Carrier -5A to +5A
Stepper Motor: Bipolar, 200 Steps/Rev, 35×26mm, 7.4V, 0.28 A/Phase
0.100" (2.54 mm) Breakaway Male Header: 1x40-Pin, Straight
Zumo Robot Kit for Arduino, v1.2 (No Motors)

Related Categories

Brushed DC Motor Drivers
Programmable Controllers
Pololu Metal Gearmotors
Pololu Plastic Gearmotors
Female-Female Premium Jumper Wires
Wires with Pre-crimped Terminals
Solderless Breadboards
Stepper Motors
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors