A4988 Stepper Motor Driver Carrier with Voltage Regulators

A4988 Stepper Motor Driver Carrier with Voltage Regulators
Pololu item #: 1183 324 in stock

Price break Unit price (US$)
1 9.95
10 8.95
100 7.95


backorders allowed

This is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. It has two voltage regulators (5 V and 3.3 V), eliminating the need for separate logic and motor supplies. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.

 Description Specs (10) Pictures (6) Resources (3) FAQs (4) On the blog (2) 
A4983/A4988 stepper motor driver carrier with regulators with included hardware.

A4983/A4988 stepper motor driver carrier with regulators with included hardware.

A4983/A4988 stepper motor driver carrier with voltage regulators.

A4983/A4988 stepper motor driver carrier with voltage regulators.

A4983/A4988 stepper motor driver carrier with voltage regulators with dimensions.

A4983/A4988 stepper motor driver carrier with voltage regulators with dimensions.

Schematic diagram of the md09a A4988 stepper motor driver carrier with regulators.

Schematic diagram of the md09a A4988 stepper motor driver carrier with regulators.

A4983/A4988 stepper motor driver carrier with voltage regulators, labeled top view.

A4983/A4988 stepper motor driver carrier with voltage regulators, labeled top view.

Minimal wiring diagram for wiring a 5V microcontroller to an A4983/A4988 stepper motor driver carrier with voltage regulators (full-step mode).

Minimal wiring diagram for wiring a 5V microcontroller to an A4983/A4988 stepper motor driver carrier with voltage regulators (full-step mode).


Related Products

A4988 Stepper Motor Driver Carrier
A4988 Stepper Motor Driver Carrier, Black Edition
DRV8825 Stepper Motor Driver Carrier, High Current
DRV8824 Stepper Motor Driver Carrier, Low Current
DRV8834 Low-Voltage Stepper Motor Driver Carrier
Stepper Motor: Bipolar, 200 Steps/Rev, 20×30mm, 3.9V, 0.6 A/Phase
Stepper Motor: Bipolar, 200 Steps/Rev, 28×32mm, 3.8V, 0.67 A/Phase
Stepper Motor: Bipolar, 200 Steps/Rev, 28×45mm, 4.5V, 0.67 A/Phase
Stepper Motor: Bipolar, 200 Steps/Rev, 35×26mm, 7.4V, 0.28 A/Phase
Stepper Motor: Bipolar, 200 Steps/Rev, 35×28mm, 10V, 0.5 A/Phase
Stepper Motor: Bipolar, 200 Steps/Rev, 35×36mm, 2.7V, 1 A/Phase
Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 42×48mm, 4V, 1.2 A/Phase
Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 42×18.6mm, 5.4V, 1 A/Phase

Related Categories

Stepper Motor Drivers
Stepper Motors
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors