A4988 Stepper Motor Driver Carrier with Voltage Regulators

Pololu item #: 1183
Brand: Pololu
Status: Discontinued 

This product has been discontinued.

Please consider the A4988 carrier versions without integrated voltage regulators as alternatives.

This is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver. It has two voltage regulators (5 V and 3.3 V), eliminating the need for separate logic and motor supplies. The driver features adjustable current limiting, overcurrent and overtemperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 – 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.

 Description Specs (10) Pictures (6) Resources (6) FAQs (4) On the blog (2) 

Related Products

A4988 Stepper Motor Driver Carrier
A4988 Stepper Motor Driver Carrier, Black Edition
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

A4988 Stepper Motor Driver Carriers
A4988 Stepper Motor Driver Carriers, Black Edition
Stepper Motor Drivers
Tic Stepper Motor Controllers
Stepper Motors
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors