Motion Control Modules » Stepper Motor Drivers » MP6602 Stepper Motor Driver Carriers »
MP6602 Stepper Motor Driver Carrier (Soldered Header Pins)
This version of our MP6602 Stepper Motor Driver Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Please see the MP6602 Stepper Motor Driver Carrier product page for more information about the driver.
Alternatives available with variations in these parameter(s): header pins soldered? Select variant…
Compare all products in MP6602 Stepper Motor Driver Carriers or 16-pin Stepper Motor Drivers.
| Description | Specs (14) | Pictures (6) | Resources (6) | FAQs (4) | On the blog (0) | Distributors (0) |
|---|
File downloads
-
MP6602 datasheet (1MB pdf)
-
Application note AN189: MP660d Configuration (1MB pdf)
This application note explains the MP6602’s advanced features (step mode, current limit, automatic hold, off time and blanking time, stall detection, and fault detection) and how to configure the internal registers to use them correctly.
-
Dimension diagram of the MP6602 Stepper Motor Driver Carrier (357k pdf)
-
3D model of the MP6602 Stepper Motor Driver Carrier (5MB step)
-
Drill guide for the MP6602 Stepper Motor Driver Carrier (20k dxf)
This DXF drawing shows the locations of all of the board’s holes.
Recommended links
-
MP6602 library for Arduino
This is a library for Arduino that helps interface with an MP6602 stepper motor driver. It uses the Arduino SPI library to communicate with the SPI interface of the MP6602.
Related products
Related categories
Coupon Discount
MP6602INTRO: Get one or more items from category MP6602 Stepper Motor Driver Carriers at $11.95. This offer is valid through 31 May 2026.
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
