Sensors » Proximity Sensors and Range Finders » Pololu Digital Distance Sensors »
Pololu Distance Sensor v2 with Pulse Width Output, 50cm Max
This small lidar-based distance sensor reports the distance of objects up to about 50 cm (20″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. The sensor works over an input voltage range of 3.0 V to 5.5 V, and the 0.1″ pin spacing makes it easy to use with standard solderless breadboards and 0.1″ perfboards.
Alternatives available with variations in these parameter(s): maximum range connector Select variant…
| Description | Specs (11) | Pictures (15) | Resources (4) | FAQs (0) | On the blog (0) | Distributors (0) |
|---|
Dimensions
| Size: | 0.85″ × 0.35″ × 0.122″ |
|---|---|
| Weight: | 0.4 g |
General specifications
| Maximum range: | 50 cm |
|---|---|
| Update rate: | 142 Hz1 |
| Minimum operating voltage: | 3.0 V |
| Maximum operating voltage: | 5.5 V |
| Connector: | none (0.1″-pitch through-holes) |
| Supply current: | 30 mA2 |
| Output type: | digital pulse width |
Identifying markings
| PCB dev codes: | irs17a |
|---|---|
| Other PCB markings: | 0J13150 |
Notes:
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
