TPS2116 Power Multiplexer Carrier with USB Type-C Connector (USB priority)

Pololu item #: 3728
Brand: Pololu supply outlook
Status: Active and Preferred 
RoHS 3 compliant


Price break Unit price (US$)
1 4.95
5 4.55
25 4.19
100 3.85


backorders allowed

This carrier board for Texas Instruments’s TPS2116 power multiplexer allows seamless switching between two power sources of 1.6 V to 5.5 V with up to 2.5 A of continuous current while blocking reverse current into either source. By default, the mux selects the higher of the two input voltages, and it can also be configured to switch from the VIN1 supply to the VIN2 supply on command or when VIN1 falls below a preset voltage. In addition, this board serves as a breakout for a USB Type-C connector that can be used to supply the preferred (VIN1) rail.

 Description Specs (7) Pictures (9) Resources (5) FAQs (0) On the blog (0) Distributors (0) 

TPS2116 Power Multiplexer Carrier with USB Type-C Connector (USB priority).

TPS2116 Power Multiplexer Carrier with USB Type-C Connector (USB priority).

TPS2116 Power Multiplexer Carrier with USB Type-C Connector (USB priority), bottom view.

TPS2116 Power Multiplexer Carrier with USB Type-C Connector (USB priority), bottom view with dimensions.

Pinout of the TPS2116 Power Multiplexer Carrier with USB Type-C Connector (USB priority).

Typical connection diagram for using a TPS2116 power multiplexer carrier without USB.

Typical connection diagram for using a TPS2116 power multiplexer carrier (usb09a) with USB as the preferred supply in priority mode.

TPS2116 Power Multiplexer Carrier with USB Type-C Connector in a breadboard.

Schematic diagram of the TPS2116 Power Multiplexer Carrier with USB Type-C Connector.


Related Products

TPS2116 Power Multiplexer Carrier with USB Type-C Connector (non-USB priority)
TPS2113A Power Multiplexer Carrier with USB Micro-B Connector
FPF1320 Power Multiplexer Carrier with USB Micro-B Connector
Mini Pushbutton Power Switch with Reverse Voltage Protection, SV
Mini Pushbutton Power Switch with Reverse Voltage Protection, LV
Mini MOSFET Slide Switch with Reverse Voltage Protection, SV
Mini MOSFET Slide Switch with Reverse Voltage Protection, LV
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Right Angle

Related Categories

Switches, Buttons, and Relays
Electronics Prototyping
Computer Interface
Voltage Regulators and Power Supplies
Batteries
Battery Holders
Pololu Power Switches
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors