Balboa 32U4 Balancing Robot Kit (No Motors or Wheels)

Pololu item #: 3575 31 in stock
Brand: Pololu
Status: Active and Preferred 
 Free shipping in USA 

Price break Unit price (US$)
1 69.95
10 62.96


backorders allowed

Build your very own programmable balancing robot with the Balboa 32U4 robot kit! The Balboa control board features an Arduino-compatible ATmega32U4 MCU, motor drivers, quadrature encoders, and a full IMU. This board also has the ability to interface with a Raspberry Pi, making the foundation for a complete Raspberry Pi-controlled balancing robot. Motors and wheels are not included: choose your wheels and motors to personalize your robot.

 Description Specs (2) Pictures (43) Resources (24) FAQs (0) On the blog (10) 

Dimensions

Size: 118 × 112 × 80 mm1
Weight: 200 g2

Notes:

1
Of assembled robot with 80×10 mm wheels (not including bumper cage, which can be installed in a variety of orientations).
2
Of assembled robot as shown in the main product picture, with motors, 80×10 mm wheels, and bumper cage. This weight does not include batteries.

Related Products

Stability Conversion Kit for Balboa
Balboa Chassis with Stability Conversion Kit (No Motors, Wheels, or Electronics)
30:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft
50:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft
75:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft
Pololu Wheel 80×10mm Pair - Black
Pololu Wheel 80×10mm Pair - Red
Pololu Wheel 80×10mm Pair - Yellow
Pololu Wheel 80×10mm Pair - Blue
Pololu Wheel 80×10mm Pair - White
Pololu Wheel 90×10mm Pair - Black
Pololu Wheel 70×8mm Pair - Black
Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
Rechargeable NiMH AA Battery: 1.2 V, 2200 mAh, 1 cell
8x2 Character LCD - Black Bezel (Parallel Interface)
Balboa 32U4 Control Board
Bumper Cage Kit for Balboa
0.100" (2.54 mm) Low-Profile Male Header: 2×7-Pin, 8.75 mm
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Female Header: 1x8-Pin, Straight
Raspberry Pi 3 Model B+
Raspberry Pi 1 Model A+ 512MB
0.100" (2.54 mm) Female Header: 2x20-Pin, Straight
Aluminum Standoff for Raspberry Pi: 11mm Length, 4mm M2.5 Thread, M-F (4-Pack)
Machine Screw: M2.5, 6mm Length, Phillips (25-pack)
Machine Hex Nut: M2.5 (25-pack)
A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge
A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge
Romi 32U4 Control Board
Zumo 32U4 Robot Kit (No Motors)

Related Categories

Balboa Robot and Accessories
Raspberry Pi Expansion Boards
Sensors
Nuts and Screws
0.1″ (2.54 mm) Female Headers
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
A-Star 32U4 Robot Controller
Zumo 32U4 Robot
Robot Kits
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors