Robot Kits » Balboa Robot and Accessories »
Balboa 32U4 Control Board
This is the control board for the Balboa 32U4 robot. It is included as part of the Balboa 32U4 Balancing Robot Kit and can be added to the Balboa Chassis with Stability Conversion Kit to turn into a Balboa 32U4 robot.
|Description||Specs (2)||Pictures (12)||Resources (14)||FAQs (0)||On the blog (0)|
This is primarily intended as a replacement part for the Balboa 32U4 Balancing Robot, but it can also be combined with the Balboa Chassis with Stability Conversion Kit to make your own Balboa 32U4 robot. This product consists of the Balboa 32U4 control board PCB shown in the main product picture along with the following additional parts:
- one buzzer
- jumper wires for soldering motors to the board
- two magnetic encoder discs
- one single flat and one single spring battery contact
- four 3/16″ #2-56 screws and nuts for mounting the board to a Balboa Chassis
See the Balboa user’s guide for assembly instructions.
People often buy this product together with:
|5-Channel Reflectance Sensor Array for Balboa 32U4 Balancing Robot|
|50:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft|