Zumo 32U4 Main Board v1.0
This is the main control board for the Zumo 32U4 robot. It is included as part of the Zumo 32U4 Robot Kit and built into the assembled versions of the Zumo 32U4 Robots. Assorted through-hole components, magnetic encoder discs, and mounting hardware are included, but the optional LCD is sold separately.
Note: As of September 2020, we began transitioning to including the Zumo 32U4 Main Board v1.1 as part of the Zumo 32U4 kits and assembled robots.
|Description||Specs (2)||Pictures (4)||Resources (4)||FAQs (0)||On the blog (0)|
New version available! We have released an updated Zumo 32U4 OLED Robot that includes an OLED display with better graphical capabilities than the LCD used by the original Zumo 32U4 robot. The Zumo 32U4 OLED Main Board can be used as a replacement part for a Zumo 32U4 OLED robot, and we recommend using the newer OLED version for new custom robot builds.
This is the original (v1.0) revision of the Zumo 32U4 Main Board, and it was previously superseded by the Zumo 32U4 Main Board v1.1. The v1.1 board replaces the Zumo 32U4’s inertial sensors with an LSM6DS33 accelerometer and gyro and an LIS3MDL magnetometer. Our Zumo 32U4 Arduino library can help you write code that will work with the inertial sensors on either revision. For more information, see the user’s guide.
This is primarily intended as a replacement part, but it can also be used to make your own Zumo 32U4 robot if you only want a subset of the parts included with our full kit. The Zumo 32U4 Robot Kit consists of the following:
- Zumo Chassis Kit
- Zumo 32U4 Main Board
- Zumo 32U4 Front Sensor Array
- Zumo 32U4 Blade
- 8×2 character LCD
People often buy this product together with:
|8×2 Character LCD - Black Bezel (Parallel Interface)|
|Zumo 32U4 Front Sensor Array|
|Zumo 32U4 Blade|