AMIS-30543 Stepper Motor Driver Carrier

Pololu item #: 2970 118 in stock
Brand: Pololu
Status: Active and Preferred 
 Free add-on shipping in USA 
This item could qualify for free shipping Free shipping in USA over $40 

Price break Unit price (US$)
1 19.95
5 16.95
25 15.75
100 14.49


backorders allowed

This is a breakout board for ON Semiconductor’s AMIS-30543 microstepping bipolar stepper motor driver, which features SPI-adjustable current limiting, 11 step modes (from full-step through 1/128-step), back-EMF feedback that can be used for stall detection or optional closed-loop control, and over-current and over-temperature protection. The board operates from 6 V to 30 V and can deliver up to approximately 1.8 A per phase without a heat sink or forced air flow (it is rated for 3 A per coil with sufficient additional cooling).

 Description Specs (10) Pictures (12) Resources (8) FAQs (4) On the blog (1) 

Related Products

0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
Screw Terminal Block: 2-Pin, 3.5 mm Pitch, Side Entry (4-Pack)
0.100" (2.54 mm) Shorting Block: Blue, Top Closed

Related Categories

Stepper Motor Drivers
Stepper Motors
Tic Stepper Motor Controllers
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Nuts and Screws
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors