Voltage Regulators and Power Supplies » Step-Down (Buck) Voltage Regulators » D24V150Fx Step-Down Voltage Regulators »
Pololu 6V, 15A Step-Down Voltage Regulator D24V150F6
| Output voltage | Typical max output current1 | Input voltage range2 |
|---|---|---|
| 6 V | 15 A | 4.5 V – 40 V |
Note 1: Actual achievable maximum continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graphs on the product pages for more information.
Note 2: Minimum input voltage is subject to dropout voltage considerations; see the dropout voltage section of product pages for more information.
Alternatives available with variations in these parameter(s): output voltage Select variant…
Compare all products in D24V150Fx Step-Down Voltage Regulators.
| Description | Specs (10) | Pictures (13) | Resources (3) | FAQs (0) | On the blog (1) | Distributors (13) |
|---|
Dimensions
| Size: | 1.7″ × 1.25″ × 0.43″1 |
|---|---|
| Weight: | 19 g1 |
General specifications
| Minimum operating voltage: | 7.2 V2 |
|---|---|
| Maximum operating voltage: | 40 V |
| Continuous output current: | 15 A3 |
| Output voltage: | 6 V |
| Reverse voltage protection?: | Y |
| Maximum quiescent current: | 100 mA4 |
Identifying markings
| PCB dev codes: | reg18b |
|---|---|
| Other PCB markings: | 0J9727 |
Notes:
- 1
- Without included optional hardware.
- 2
- For small loads; this voltage rises approximately linearly up to around 7.6 V at 15 A output.
- 3
- This value is mainly for comparison to our other regulators. Actual achievable continuous output current is a function of input voltage and is limited by thermal dissipation. See the output current graph under the description tab for more information.
- 4
- Typical maximum for the higher end of the input voltage range; it is a little lower at lower voltages. The ENABLE pin can be used to reduce the quiescent current to less than 10 μA per volt on VIN.
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
