Voltage Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators » S9V11x Step-Up/Step-Down Voltage Regulators »
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3
| Output voltage | Typical max output current1 | Input voltage range | Low-voltage cutoff | Size |
|---|---|---|---|---|
| 3.3 V (5 V selectable) | 1.5 A | 2 V – 16 V (3 V startup) |
3 V (fixed) | 0.5″ × 0.60″ × 0.17″ |
Note 1: For input voltages close to the output, after startup. Startup current is limited to approximately 700 mA until output voltage reaches the nominal voltage. After startup, the actual achievable maximum continuous current is a function of input and output voltage and is limited by thermal dissipation. See the output current graphs on the product page for more information.
Alternatives available with variations in these parameter(s): output type low-voltage cutoff Select variant…
Compare all products in S9V11x Step-Up/Step-Down Voltage Regulators.
| Description | Specs (12) | Pictures (14) | Resources (3) | FAQs (0) | On the blog (1) | Distributors (56) |
|---|
File downloads
-
Dimension diagram for the Step-Up/Step-Down Voltage Regulator S9V11x (142k pdf)
Note: this dimension diagram does not apply to the smaller S9V11F5.
-
3D model of the Step-Up/Step-Down Voltage Regulator S9V11x (4MB step)
Note: this model does not apply to the smaller S9V11F5.
-
Drill guide for the Step-Up/Step-Down Voltage Regulator S9V11x (23k dxf)
This DXF drawing shows the locations of all of the board’s holes. Note that this does not apply to the smaller S9V11F5.
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
