Voltage Regulators and Power Supplies » Step-Up/Step-Down Voltage Regulators » S9V11x Step-Up/Step-Down Voltage Regulators »
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3
| Output voltage | Typical max output current1 | Input voltage range | Low-voltage cutoff | Size |
|---|---|---|---|---|
| 3.3 V (5 V selectable) | 1.5 A | 2 V – 16 V (3 V startup) |
3 V (fixed) | 0.5″ × 0.60″ × 0.17″ |
Note 1: For input voltages close to the output, after startup. Startup current is limited to approximately 700 mA until output voltage reaches the nominal voltage. After startup, the actual achievable maximum continuous current is a function of input and output voltage and is limited by thermal dissipation. See the output current graphs on the product page for more information.
Alternatives available with variations in these parameter(s): output type low-voltage cutoff Select variant…
Compare all products in S9V11x Step-Up/Step-Down Voltage Regulators.
| Description | Specs (12) | Pictures (14) | Resources (3) | FAQs (0) | On the blog (1) | Distributors (56) |
|---|
|
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3 (silkscreen side). |
|---|
 |
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3 (non-silkscreen side). |
|---|
 |
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3 with included optional header pins. |
|---|
 |
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3 next to US quarter dollar for size reference. |
|---|
 |
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3 labeled pinout. |
|---|
 |
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3 (silkscreen side). |
|---|
 |
3.3V Step-Up/Step-Down Voltage Regulator w/ Fixed 3V Low-Voltage Cutoff S9V11F3S5C3 (non-silkscreen side). |
|---|
 |
Step up/step down regulator S9V11MACMA on a breadboard. |
|---|
 |
Step up/step down regulator S9V11F5S6CMA on a breadboard. |
|---|
 |
Step up/step down regulator S9V11F3S5 on a breadboard. |
|---|
 |
To permanently select the alternate output voltage on the S9V11FxSx versions, you can solder a piece of wire between SEL and the unpopulated pad next to it. |
|---|
 |
Typical maximum continuous output current of Step-Up/Step-Down Voltage Regulator S9V11x. |
|---|
 |
Typical efficiency of Step-Up/Step-Down Voltage Regulator S9V11x with VOUT set to 3.3V. |
|---|
 |
Typical efficiency of Step-Up/Step-Down Voltage Regulator S9V11x with VOUT set to 5V. |
|---|
Related products
Related categories
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2026 Pololu Corporation
