Regulators and Power Supplies » Step-Down Voltage Regulators » Pololu D24V22Fx Step-Down Voltage Regulators »
Pololu 6V, 2.5A Step-Down Voltage Regulator D24V22F6
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 36 V and efficiently reduces it to 6 V. The board measures only 0.7″ × 0.7″ yet delivers typical continuous output currents between 1.8 A and 2.5 A, depending on the input voltage, which makes this regulator well suited for powering moderate loads like sensors or small motors. An optional enable input can be used to put the regulator in a low-power state with a current draw of 5 µA to 10 µA per volt on VIN. The regulator also features reverse voltage protection and a power-good output indicates when the regulator cannot adequately maintain the output voltage.
Alternatives available with variations in these parameter(s): output voltage
|Description||Specs (10)||Pictures (8)||Resources (3)||FAQs (0)||On the blog (2)|
30 March 2018
At Pololu, I have spent the recent weeks developing new products, like the motor driver I announced on Wednesday, but at school (I am a mechanical...
1 December 2015
This post is a few weeks late, but I am following up on my original D24V22F12 12V regulator introduction to let you know that we now have 3.3 V,...