New products: 3.3V, 5V, 6V, 7.5V, and 9V Step-Down Voltage Regulator D24V22Fx

This post is a few weeks late, but I am following up on my original D24V22F12 12V regulator introduction to let you know that we now have 3.3 V, 5 V, 6 V, 7.5 V, 9 V, and 12 V versions of our new D24V22Fx family of step-down voltage regulators. These regulators all have typical efficiencies of 85% to 95% and can deliver continuous currents over 2 A in typical applications.

The new D24V22Fx regulators are priced lower than the older D24V25Fx family that they will be replacing. The two designs have the same size and similar current capabilities and input voltage ranges, but they do not have the same pinout and are based on different internal circuits, so there are fundamental differences in operation. In particular, these newer D24V22Fx regulators have much lower dropout voltages and provide a “power good” signal, and the newer design allows for higher output voltages (e.g. 12 V).

See the product pages for any of the D24V22Fx regulators for more information on these new regulators, or visit our voltage regulator category to see all of our regulator options.

Related products

	Pololu 3.3V, 2.6A Step-Down Voltage Regulator D24V22F3
	Pololu 5V, 2.5A Step-Down Voltage Regulator D24V22F5
	Pololu 6V, 2.5A Step-Down Voltage Regulator D24V22F6
	Pololu 7.5V, 2.4A Step-Down Voltage Regulator D24V22F7
	Pololu 9V, 2.3A Step-Down Voltage Regulator D24V22F9
	Pololu 12V, 2.2A Step-Down Voltage Regulator D24V22F12