Pololu 5V, 2.5A Step-Down Voltage Regulator D24V25F5
This small synchronous switching step-down (or buck) regulator takes an input voltage of up to 38 V and efficiently reduces it to 5 V. The board measures only 0.7″ × 0.7″, but it allows a typical continuous output current of up to 2.5 A. Typical efficiencies of 85% to 95% make this regulator well suited for powering moderate loads like sensors or small motors. High efficiencies are maintained at light loads by dynamically changing the switching frequency, and an optional shutdown pin enables a low-power state with a current draw of a few hundred microamps.
Alternatives available with variations in these parameter(s): output voltage
|Description||Specs (10)||Pictures (10)||Resources (3)||FAQs (0)||On the blog (3)|
- Dimension diagram of the D24V25Fx 2.5A Step-Down Voltage Regulator (159k pdf)
- 3D model of the D24V25Fx 2.5A Step-Down Voltage Regulator (5MB step)
- Step-Down Voltage Regulator D24V25Fx drill guide (32k dxf)
- This DXF drawing shows the locations of all of the board’s holes.