HP 6V Motor with 48 CPR Encoder for 25D mm HP 6V Metal Gearmotors (No Gearbox)

HP 6V Motor with 48 CPR Encoder for 25D mm HP 6V Metal Gearmotors (No Gearbox)
Pololu item #: 2269 44 in stock

Price break Unit price (US$)
1 23.95
10 21.56

backorders allowed

This is the motor and encoder portion of our high-power (HP), 6V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.

Key specs at 6 V: 9800 RPM and 250 mA free-run, 2 oz-in (0.1 kg-cm) and 6.5 A stall.

Select options:
 Description Specs (9) Pictures (4) Resources (1) FAQs (1) On the blog (0) 


Size: 24.2D x 43L mm1
Weight: 59 g

General specifications

Gear ratio: 1:12
Free-run speed @ 6V: 9800 rpm
Free-run current @ 6V: 250 mA
Stall current @ 6V: 6500 mA
Stall torque @ 6V: 2 oz·in
Lead length: 11 in3
Motor type: 6.5A stall @ 6V (HP 6V)


Length measurement is from gearbox face plate to bottom of encoder disc.
This motor does not have a gearbox.
May vary by a few inches.

Related Products

VNH5019 Motor Driver Carrier
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Qik 2s12v10 Dual Serial Motor Controller
Female Crimp Pins for 0.1" Housings 100-Pack
Male Crimp Pins for 0.1" Housings 100-Pack
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

6V High-Power (HP) 25D mm Gearmotors
Brushed DC Motor Controllers
Brushed DC Motor Drivers
Robot Controllers
Current Sensors
37D mm Gearmotors
Wild Thumper All-Terrain Chassis
Micro Metal Gearmotors
Premium Jumper Wires
Wires with Pre-crimped Terminals
Crimp Connector Housings
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors