Pololu Metal Gearmotors » Micro Metal Gearmotors » Micro Metal Gearmotors with Extended Motor Shafts »
10:1 Micro Metal Gearmotor HP 6V with Extended Motor Shaft
This gearmotor is a miniature high-power, 6 V brushed DC motor with a 9.96:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 6 V: 3000 RPM and 120 mA with no load, 4 oz-in (0.3 kg-cm) and 1.6 A at stall.
Alternatives available with variations in these parameter(s): gear ratio motor type extended motor shaft? Select variant…
Compare all products in Micro Metal Gearmotors with Extended Motor Shafts or
6V High-Power (HP) Micro Metal Gearmotors.
Description | Specs (10) | Pictures (20) | Resources (13) | FAQs (0) | On the blog (0) |
---|
![]() |
Micro metal gearmotor HPCB with long-life carbon brushes (left) next to one with precious metal brushes. |
---|
![]() |
Micro metal gearmotor HPCB long-life carbon brushes (left) next to micro metal gearmotor HP precious metal brushes (right). |
---|
![]() |
Magnetic Encoder Kit for Micro Metal Gearmotors assembled with ribbon cable wires. |
---|
![]() |
Pololu wheel 32×7mm on a micro metal gearmotor. |
---|
![]() |
Black Pololu 70×8mm wheel on a Pololu micro metal gearmotor. |
---|
![]() |
Black Pololu 90×10mm wheel on a Pololu micro metal gearmotor. |
---|
![]() |
12mm Hex Wheel Adapter for 3mm Shaft on a Micro Metal Gearmotor. |
---|
![]() |
Micro metal gearmotor mounted to a piece of acrylic with black mounting bracket version. |
---|
![]() |
Micro metal gearmotor mounted to a piece of acrylic with black mounting bracket version. |
---|
![]() |
Pololu micro metal gearmotor bracket extended with micro metal gearmotor. |
---|
![]() |
Pololu micro metal gearmotor bracket extended with micro metal gearmotor. |
---|
![]() |
Micro metal gearmotor with Pololu wheel 42×19mm and extended bracket. |
---|
![]() |
Micro metal gearmotor and Pololu wheel 42×19mm mounted with extended mounting bracket. |
---|
![]() |
Pololu 5" round robot chassis RRC04A with drive components and encoders mounted on top. |
---|
![]() |
Encoder for Pololu wheel 42×19mm with wheel, motor, and bracket. |
---|
![]() |
Side view of the encoder for Pololu wheel 42×19mm, mounted to a bracket. |
---|
![]() |
Some of the Pololu metal gearmotors. |
---|
![]() |
37D mm metal gearmotor next to a micro metal gearmotor for size comparison. |
---|
![]() |
Dimensions of the Pololu micro metal gearmotors with precious metal brushes: low-power (LP), medium-power (MP), and high-power (HP). Units are mm over [inches]. |
---|
![]() |
Dimensions of the Pololu micro metal gearmotors with carbon brushes (HPCB). Units are mm over [inches]. |
---|