Motion Control Modules » Stepper Motor Drivers » DRV8825 Stepper Motor Driver Carriers, High Current »
DRV8825 Stepper Motor Driver Carrier, High Current
This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.
Alternatives available with variations in these parameter(s): header pins soldered? bulk packaged?
|Description||Specs (12)||Pictures (9)||Resources (8)||FAQs (4)||On the blog (3)|
20 July 2017
I am excited to announce our new product, the Tic T825 USB Multi-Interface Stepper Motor Controller. The Tic makes basic speed or position control...
14 April 2015
One of my many roles here at Pololu is overseeing technical support, and I have seen countless cases of customers who have problems with their...
26 September 2014
We recently substantially reduced prices on our stepper motor driver carriers, and I figured this announcement was a good time to give you an update...