DRV8825 Stepper Motor Driver Carrier, High Current

Pololu item #: 2133 122 in stock
Brand: Pololu
Status: Active and Preferred 
 Free add-on shipping in USA 
This item could qualify for free shipping Free shipping in USA over $40 

Price break Unit price (US$)
1 8.95
5 7.49
25 6.75
100 5.95


backorders allowed

This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. This board ships with 0.1″ male header pins included but not soldered in.

Alternatives available with variations in these parameter(s): header pins soldered? bulk packaged? Select variant…

 Description Specs (12) Pictures (9) Resources (8) FAQs (4) On the blog (3) 

DRV8825 stepper motor driver carrier with included hardware.

DRV8825 stepper motor driver carrier.

DRV8825 stepper motor driver carrier.

DRV8824/DRV8825 stepper motor driver carrier with dimensions.

DRV8824/DRV8825 stepper motor driver carriers with included header pins soldered.

Schematic diagram for the DRV8824/DRV8825 stepper motor driver carrier.

Schematic of nSLEEP and nFAULT pins on DRV8824/DRV8825/DRV8834 carriers.

Minimal wiring diagram for connecting a microcontroller to a DRV8824/DRV8825 stepper motor driver carrier (full-step mode).

Alternative minimal wiring diagram for connecting a microcontroller to a DRV8824/DRV8825 stepper motor driver carrier (full-step mode).


Related Products

Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered)
Tic T825 USB Multi-Interface Stepper Motor Controller
DRV8825 Stepper Motor Driver Carrier, High Current (Header Pins Soldered)
DRV8825 Stepper Motor Driver Carrier, High Current (Bulk, No Header Pins)
DRV8825 Stepper Motor Driver Carrier, High Current (Bulk, Header Pins Soldered)
DRV8834 Low-Voltage Stepper Motor Driver Carrier
DRV8880 Stepper Motor Driver Carrier
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

DRV8825 Stepper Motor Driver Carriers, High Current
Stepper Motor Drivers
Tic Stepper Motor Controllers
Stepper Motors
Solderless Breadboards
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
0.1″ (2.54 mm) Male Headers
0.1″ (2.54 mm) Female Headers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors