High-Power Simple Motor Controller G2 24v12

Pololu item #: 1365 7 in stock
Brand: Pololu
Status: Active and Preferred 
 Free shipping in USA 
 Free add-on shipping in USA 

Price break Unit price (US$)
1 39.95
5 36.75
25 33.81
100 31.11


backorders allowed

This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output currents up to 12 A without a heat sink. Male headers and terminal blocks are included but not soldered, allowing for custom installations.

Alternatives available with variations in these parameter(s): version Select variant…

 Description Specs (14) Pictures (6) Resources (9) FAQs (1) On the blog (1) 

Dimensions

Size: 2.1″ × 1.1″ × 0.42″1
Weight: 7.5 g1

General specifications

Motor channels: 1
Control interface: USB; non-inverted TTL serial; I²C;
RC servo pulses; analog voltage2
Minimum operating voltage: 6.5 V
Maximum operating voltage: 40 V3
Continuous output current per channel: 12 A4
Maximum PWM frequency: 22.5 kHz
Maximum logic voltage: 3.3 V5
Reverse voltage protection?: Y
Version: G2 24v12 (40 V max, 12 A max continuous)
Connectors soldered?: N

Identifying markings

PCB dev codes: umc08a
Other PCB markings: 0J11672, blank white box

Notes:

1
Without included hardware.
2
Autodetects baud rates between 1200 and 500,000 bps, or can be set to any fixed baud rate in this range.
3
Absolute maximum; higher voltages can permanently destroy the motor driver. Recommended maximum is approximately 34 V, which leaves a safety margin for ripple voltage on the supply line.
4
Typical results at room temperature running at 90% duty cycle.
5
All digital inputs are 5V tolerant.

Related Products

Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
High-Power Simple Motor Controller G2 18v15 (Connectors Soldered)
High-Power Simple Motor Controller G2 18v15
High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)
High-Power Simple Motor Controller G2 18v25
High-Power Simple Motor Controller G2 24v19
Pololu G2 High-Power Motor Driver 18v17
Pololu G2 High-Power Motor Driver 24v13
Pololu G2 High-Power Motor Driver 18v25
Pololu G2 High-Power Motor Driver 24v21
Twisted Servo Y Splitter Cable 12" Female - 2x Female
T Connector Male-Female Pair
XT60 Connector Male-Female Pair, Black
XT60 Connector Male-Female Pair, Yellow
Tamiya Plug with 10cm Leads, Female
Tamiya Plug with 10cm Leads, Male
Screw Terminal Block: 2-Pin, 5 mm Pitch, Side Entry (4-Pack)
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Shorting Block: Blue, Top Closed
ACS714 Current Sensor Carrier -30A to +30A
50:1 Metal Gearmotor 37Dx70L mm with 64 CPR Encoder
75:1 Metal Gearmotor 25Dx54L mm HP 6V
Dagu Wild Thumper 6WD All-Terrain Chassis, Silver, 34:1
Dagu Wild Thumper 4WD All-Terrain Chassis, Black, 75:1

Related Categories

Pololu Simple Motor Controllers
Pololu G2 Simple Motor Controllers
Pololu High-Power Motor Drivers
Motors and Gearboxes
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Pololu Jrk Motor Controllers with Feedback
RoboClaw Motor Controllers
Pololu TReX Dual Motor Controllers
Pololu Qik Dual Serial Motor Controllers
Wild Thumper All-Terrain Chassis
Brushed DC Motor Drivers
RC Interface
Programmable Controllers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors