High-Power Simple Motor Controller G2 24v12

Pololu item #: 1365 7 in stock
Brand: Pololu
Status: Active and Preferred 
 Free shipping in USA 
 Free add-on shipping in USA 

Price break Unit price (US$)
1 39.95
5 36.75
25 33.81
100 31.11


backorders allowed

This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software. It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 40 V operating range and can deliver continuous output currents up to 12 A without a heat sink. Male headers and terminal blocks are included but not soldered, allowing for custom installations.

Alternatives available with variations in these parameter(s): version Select variant…

 Description Specs (14) Pictures (6) Resources (9) FAQs (1) On the blog (1) 
How often is the analog input sampled? How quickly is the motor updated?

The analog input readings on the Simple Motor Controller are updated approximately every 2.3 ms (435 Hz) if the “Ignore pot disconnect” option is selected. If that option is not selected, which is the default, the readings are updated half as frequently.

If no acceleration or deceleration limits are used, the outputs of the motor controller will be updated very quickly (within a few hundred microseconds) after the analog reading is complete. If those limits are enabled, the motor might take up to a millisecond to be updated after the analog reading is complete.

Related Products

Thin (2mm) USB Cable A to Micro-B, 6 ft, Low/Full-Speed Only
USB Cable A to Micro-B, 6 ft
High-Power Simple Motor Controller G2 18v15 (Connectors Soldered)
High-Power Simple Motor Controller G2 18v15
High-Power Simple Motor Controller G2 24v12 (Connectors Soldered)
High-Power Simple Motor Controller G2 18v25
High-Power Simple Motor Controller G2 24v19
Pololu G2 High-Power Motor Driver 18v17
Pololu G2 High-Power Motor Driver 24v13
Pololu G2 High-Power Motor Driver 18v25
Pololu G2 High-Power Motor Driver 24v21
Twisted Servo Y Splitter Cable 12" Female - 2x Female
T Connector Male-Female Pair
XT60 Connector Male-Female Pair, Black
XT60 Connector Male-Female Pair, Yellow
Tamiya Plug with 10cm Leads, Female
Tamiya Plug with 10cm Leads, Male
Screw Terminal Block: 2-Pin, 5 mm Pitch, Side Entry (4-Pack)
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black
0.100" (2.54 mm) Shorting Block: Blue, Top Closed
ACS714 Current Sensor Carrier -30A to +30A
50:1 Metal Gearmotor 37Dx70L mm with 64 CPR Encoder
75:1 Metal Gearmotor 25Dx54L mm HP 6V
Dagu Wild Thumper 6WD All-Terrain Chassis, Silver, 34:1
Dagu Wild Thumper 4WD All-Terrain Chassis, Black, 75:1

Related Categories

Pololu Simple Motor Controllers
Pololu G2 Simple Motor Controllers
Pololu High-Power Motor Drivers
Motors and Gearboxes
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Pololu Jrk Motor Controllers with Feedback
RoboClaw Motor Controllers
Pololu TReX Dual Motor Controllers
Pololu Qik Dual Serial Motor Controllers
Wild Thumper All-Terrain Chassis
Brushed DC Motor Drivers
RC Interface
Programmable Controllers
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors