AltIMU-10 Gyro, Accelerometer, Compass, and Altimeter (L3GD20, LSM303DLHC, and LPS331AP Carrier)

Pololu item #: 1269

This product has been discontinued.

This has been replaced by a newer version (v4).

The Pololu AltIMU-10 is an inertial measurement unit (IMU) and altimeter that features the same L3GD20 gyro and LSM303DLHC accelerometer and magnetometer as the MinIMU-9 v2, and adds an LPS331AP digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the sensor’s altitude and absolute orientation. The board operates from 2.5 to 5.5 V and has a 0.1″ pin spacing.

 Description Specs (8) Pictures (7) Resources (18) FAQs (1) On the blog (3) 

Related Products

MinIMU-9 v2 Gyro, Accelerometer, and Compass (L3GD20 and LSM303DLHC Carrier)
LSM303DLHC 3D Compass and Accelerometer Carrier with Voltage Regulator
L3GD20 3-Axis Gyro Carrier with Voltage Regulator
LPS331AP Pressure/Altitude Sensor Carrier with Voltage Regulator
MinIMU-9 v3 Gyro, Accelerometer, and Compass (L3GD20H and LSM303D Carrier)
UM6 r2 Ultra-Miniature Orientation Sensor
UM7-LT Orientation Sensor
L3GD20H 3-Axis Gyro Carrier with Voltage Regulator
LSM303D 3D Compass and Accelerometer Carrier with Voltage Regulator
66-Channel LS20031 GPS Receiver Module (MT3339 Chipset)
Adafruit Data Logging Shield for Arduino

Related Categories

Accelerometers, Gyros, & Compasses
Sensors
Development Boards (Programmable Controllers)
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
Solderless Breadboards
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors