70:1 Metal Gearmotor 37Dx54L mm 12V (Spur Pinion)
This gearmotor is a powerful brushed DC motor with 70:1 metal gearbox intended for operation at 12 V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available with an integrated encoder.
|voltage||no-load performance||stall extrapolation|
|12 V||150 RPM, 200 mA||27 kg⋅cm (380 oz⋅in), 5.5 A|
Alternatives available with variations in these parameter(s): gear ratio encoders?
|Description||Specs (19)||Pictures (7)||Resources (4)||FAQs (1)||On the blog (0)|
|Size:||37D × 54L mm1|
|Shaft diameter:||6 mm2|
|No-load speed @ 12V:||150 rpm|
|No-load current @ 12V:||0.2 A|
|Stall current @ 12V:||5.5 A3|
|Stall torque @ 12V:||27 kg·cm3|
|Max output power @ 12V:||10 W|
|No-load speed @ 6V:||73 rpm4|
|No-load current @ 6V:||0.15 A4|
|Stall current @ 6V:||3.0 A5|
|Stall torque @ 6V:||16 kg·cm5|
Performance at maximum efficiency
|Max efficiency @ 12V:||52 %|
|Speed at max efficiency:||130 rpm|
|Torque at max efficiency:||3.2 kg·cm|
|Current at max efficiency:||0.68 A|
|Output power at max efficiency:||4.2 W|
- Length measurement is from gearbox face plate to back of motor (it does not include the output shaft or motor terminals). See dimension diagram for details.
- D shaft.
- Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. As the motor heats up, as happens as it approaches an actual stall, the stall torque and current decrease.
- This motor will run at 6 V but is intended for operation at 12 V.
- Stalling is likely to damage the gearmotor. Stall parameters come from a theoretical extrapolation of performance at loads far from stall. This motor will run at 6 V but is intended for operation at 12 V.