Sensors » Proximity Sensors and Range Finders » Pololu Digital Distance Sensors »
Pololu Digital Distance Sensor with Pulse Width Output, 130cm Max, Side-Entry Connector
This small lidar-based distance sensor reports the distance of objects up to about 130 cm (50″) away with a pulsed signal similar to a hobby servo control signal. A digital microcontroller pin can be used to time the length of each high pulse, which encodes the measured distance. It works over an input voltage range of 3.0 V to 5.5 V and features a side-entry 3-pin JST SH-style connector that is compatible with our 3-pin JST SH-style cables.
Note: The maximum range of 130 cm is only achievable for high-reflectance objects in good ambient conditions. Lower-reflectivity targets or poor ambient conditions will reduce the maximum range.
Alternatives available with variations in these parameter(s): maximum range connector Select variant…
Description | Specs (12) | Pictures (10) | Resources (3) | FAQs (0) | On the blog (0) | Distributors (0) |
---|
File downloads
-
Dimension diagram of the Pololu Digital Distance Sensor with Side-Entry Connector (290k pdf)
-
3D model of the Pololu Digital Distance Sensor with Side-Entry Connector (4MB step)
-
Drill guide for the Pololu Digital Distance Sensor with Side-Entry Connector (13k dxf)
This DXF drawing shows the locations of all of the board’s holes.