Electronics » Voltage Regulators and Power Supplies » Shunt Regulators »
Shunt Regulator: 33.0 V, 32.8Ω, 3W
This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 33.0 V, a shunt resistance of 32.8 ohms, and four SMT shunt resistors populated on one side of the PCB. This version is intended for those who want to use this board with a higher-power external shunt resistor. An external potentiometer can also be added to change the set voltage.
| Description | Specs (8) | Pictures (8) | Resources (3) | FAQs (0) | On the blog (1) | Distributors (0) |
|---|
Dimensions
| Size: | 0.80″ × 1.125″ × 0.30″ |
|---|---|
| Weight: | 2.7 g |
General specifications
| Output voltage: | 33.0 V |
|---|---|
| Shunt resistance: | 32.8 Ohm |
| Power: | 3 W |
| Maximum quiescent current: | 0.5 mA |
Identifying markings
| PCB dev codes: | tvs01a |
|---|---|
| Other PCB markings: | 0J11055 |
Related products
Home | Forum | Blog | Support | Ordering Information | Lists | Distributors | BIG Order Form | About | Contact
© 2001–2025 Pololu Corporation
