Electronics » Voltage Regulators and Power Supplies » Shunt Regulators »
Shunt Regulator: 33.0 V, 32.8Ω, 3W
This shunt regulator can protect power supplies from voltage spikes generated by motor controllers they are connected to. This version has a fixed set point of 33.0 V, a shunt resistance of 32.8 ohms, and four SMT shunt resistors populated on one side of the PCB. This version is intended for those who want to use this board with a higher-power external shunt resistor. An external potentiometer can also be added to change the set voltage.
Description | Specs (8) | Pictures (8) | Resources (3) | FAQs (0) | On the blog (1) |
---|
File downloads
-
Drill guide for Shunt Regulators (53k dxf)
This DXF drawing shows the locations of all of the board’s holes.
-
Dimension diagram of the Shunt Regulators (187k pdf)
-
3D model of the Shunt Regulators (5MB step)