Polo-BOO! Halloween Sale going on NOW – Use coupon code PoloBOO2021 for 10% off active Pololu-brand products!

MP 12V Motor with 48 CPR Encoder for 25D mm Metal Gearmotors (No Gearbox, No End Cap)

Pololu item #: 3236
Brand: Pololu
Status: Obsolete 
RoHS 3 compliant

This product has been discontinued.

This motor has been replaced by a functionally identical version with a removable protective end cap over the encoder

This is the motor and encoder portion of our medium-power (HP), 12V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes.

Key specifications:

voltage no-load performance stall extrapolation
12 V 7800 RPM, 50 mA 0.2 kg⋅cm (2.7 oz⋅in), 2.1 A

You can use the following selection boxes to choose from all of our 25D metal gearmotor versions:

Alternatives available with variations in these parameter(s): gear ratio motor type encoders? Select variant…

 Description Specs (13) Pictures (5) Resources (2) FAQs (1) On the blog (0) 

File downloads

  • Modifying the Wild Thumper to use motors with encoders (3MB pdf)

    Customer Richard Nguyen has documented his work modifying the Wild Thumper chassis to use 25D motors with encoders in place of the chassis’s included motors.

    Note: This is not an easy modification, and the chassis can be damaged if it is not done properly, so we generally recommend against it, and we can only provide very limited support for those who want to attempt it. The manufacturer did not intend for the chassis to be modified in this way, and we do not know how well such a modification will work out.

Recommended links

Related Products

VNH5019 Motor Driver Carrier
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Pololu Simple High-Power Motor Controller 18v15 (Fully Assembled)
Pololu Qik 2s12v10 Dual Serial Motor Controller
Female Crimp Pins for 0.1" Housings 100-Pack
Male Crimp Pins for 0.1" Housings 100-Pack
0.100" (2.54 mm) Breakaway Male Header: 1×40-Pin, Straight, Black

Related Categories

Brushed DC Motor Controllers
Brushed DC Motor Drivers
Robot Controllers
Current Sensors
37D Metal Gearmotors
Micro Metal Gearmotors
Wild Thumper All-Terrain Chassis
Premium Jumper Wires
Wires with Pre-Crimped Terminals
Crimp Connector Housings
Log In
Pololu Robotics & Electronics
Shopping cart
(702) 262-6648
Same-day shipping, worldwide
Menu
Shop Blog Forum Support
My account Comments or questions? About Pololu Contact Ordering information Distributors