MP6500 Stepper Motor Driver Carrier, Potentiometer Current Control
This breakout board for the MPS MP6500 microstepping bipolar stepper motor driver is Pololu’s latest stepper motor driver. The module has a pinout and interface that are very similar to that of our popular A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. The MP6500 offers up to 1/8-step microstepping, operates from 4.5 V to 35 V, and can deliver up to approximately 1.5 A per phase continuously without a heat sink or forced air flow (up to 2.5 A peak). This version of the board uses an on-board trimmer potentiometer for setting the current limit, and the board ships with 0.1″ male header pins included but not soldered in.
Alternatives available with variations in these parameter(s): current limit control header pins soldered?
|Description||Specs (14)||Pictures (10)||Resources (9)||FAQs (4)||On the blog (2)|
New-ish product roundup: 24 more QTR arrays, MP6500 carriers with soldered headers, and a pressure sensor- 20 September 2018
We’ve been hard at work over the past week putting up lots of new (but perhaps familiar-seeming) products. Here’s a quick recap: 24 new QTR...
12 January 2018
We are excited to expand our colorful selection of stepper motor drivers with carrier boards for the brand new MPS MP6500 stepper motor...