Motion Control Modules » Brushed DC Motor Controllers » Pololu Jrk Motor Controllers with Feedback »
Jrk 21v3 USB Motor Controller with Feedback
The Jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). The controller can be used with feedback for closed-loop speed or position control, or it can be used without feedback as an open-loop speed control. The continuous output current is approximately 3 A in the recommended operating range of 8 V to 28 V, with derated performance down to 5 V and transient protection to 40 V. This version ships with connectors included but not soldered in, allowing for custom installations.
Alternatives available with variations in these parameter(s): version Select variant…
Compare all products in Pololu Jrk Motor Controllers with Feedback.
Description | Specs (16) | Pictures (23) | Resources (11) | FAQs (2) | On the blog (4) |
---|
-
New products: Jrk G2 USB Motor Controllers with Feedback
- 19 April 2018After many months or years of work (depending on how you look at it), I am happy to introduce our newest motor controllers, the Jrk G2 USB Motor...
-
VertiGo robot drives up walls with propellers
- 29 December 2015VertiGo is a novel robot designed with one main goal: the ability to drive on floors and walls, even if the walls aren’t perfectly flat. To...
-
Raspberry Pi-controlled chicken coop
- 6 November 2014Forum user bennard posted about his WiFi-enabled chicken coop, which uses a Raspberry Pi to monitor and log data about its environment, serve a web...
-
Maker Faire demo: automated treasure chest with jrk motor controller and linear actuator
- 25 April 2014This blog post is part of a continuing series of blogs about the demos that Pololu displayed at our booth at Las Vegas Mini Maker Faire 2014. For...